Conformal cooling (CC) channels are a series of cooling channels that are equidistant from
the mold cavity surfaces. CC systems show great promise to substitute conventional straight …

In injection molding, the mold temperature needs to be controlled carefully not only to
improve part quality but also to reduce cycle time. To fulfill these objectives, an energy …

The use of selective induction heating of molding surfaces allows for better filling of molding
cavities and has a positive effect on the properties of molded products. This is particularly …

Injection molding is a polymer processing technology used for manufacturing parts with
elastic hinges. Elastic hinges are widely used in FMCG (Fast Moving Consumer Goods) …

The main method to improve the filling of the cavity by the polymer melt is to increase the
mold temperature. Rapid temperature cycling (RTC) technologies have been used around …

针对管道布局, 最大允许能耗给定条件下快速热循环注塑成形(RHCM) 注塑模具型腔表面快速
均匀加热的问题, 提出以单根加热棒热流密度为设计变量, 以模具型腔表面升温效率和温度分布 …

Injection molding is the widely used processing technology of polymeric materials. In the
classic variant of the injection molding low, constant mold temperature is used for the …

To enhance the quality of parts and decrease cycle time in injection molding, appropriate
control of mold temperature is required. To achieve these objectives, a novel mold design …

The main method to improve the filling of the cavity by the polymer melt is to increase the
mold temperature. Rapid Temperature Cycling (RTC) technologies have been used around …

In this work, a three-dimensional numerical study of thermal behavior of RHCM mold for
automotive parts production was undertaken. Particularly, simulation of several …