Micro-and nanoindentation techniques for mechanical characterisation of materials
NK Mukhopadhyay, P Paufler - International materials …, 2006 - journals.sagepub.com
Indentation techniques have been extensively used for mechanical characterisation of
materials. Development of instrumented indentation techniques at low and ultra low load …
materials. Development of instrumented indentation techniques at low and ultra low load …
Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals
Nanoindentation experiments are widely used for assessing the local mechanical properties
of materials. In recent years some new exciting developments have been performed for also …
of materials. In recent years some new exciting developments have been performed for also …
[HTML][HTML] Nanoindentation studies of materials
CA Schuh - Materials today, 2006 - Elsevier
Nanoindentation has become a commonplace tool for the measurement of mechanical
properties at small scales, but may have even greater importance as a technique for …
properties at small scales, but may have even greater importance as a technique for …
Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings
Cathodic arc deposition of ceramic coatings is gaining importance due to their good
adhesion and minimum residual stresses. In this work we have arc deposited TiN coatings …
adhesion and minimum residual stresses. In this work we have arc deposited TiN coatings …
Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy
RZ Valiev, MY Murashkin, A Kilmametov… - Journal of materials …, 2010 - Springer
Processing by severe plastic deformation (SPD) typically increases the strength of metals
and alloys drastically by decreasing their grain size into the submicrometer or nanometer …
and alloys drastically by decreasing their grain size into the submicrometer or nanometer …
Experimental evidence for grain-boundary sliding in ultrafine-grained aluminum processed by severe plastic deformation
Grain-boundary sliding in ultrafine-grained aluminum to examine material processing by
severe plastic deformation (SPD), was described. It was proposed that sliding occurred in …
severe plastic deformation (SPD), was described. It was proposed that sliding occurred in …
Structural, magnetic, and mechanical properties of electrodeposited cobalt–tungsten alloys: Intrinsic and extrinsic interdependencies
The mapping of structural, magnetic, and mechanical properties of Co–W coatings
galvanostatically electrodeposited from a citrate–borate bath is investigated. The intrinsic …
galvanostatically electrodeposited from a citrate–borate bath is investigated. The intrinsic …
Mechanical properties of intermetallic phases in multi-component Al–Si alloys using nanoindentation
CL Chen, A Richter, RC Thomson - Intermetallics, 2009 - Elsevier
The presence of additional elements in a multi-component Al–Si alloy system allows many
complex intermetallic phases to form. The mechanical properties of different intermetallic …
complex intermetallic phases to form. The mechanical properties of different intermetallic …
Strain rate sensitivity studies in an ultrafine-grained Al–30 wt.% Zn alloy using micro-and nanoindentation
The characteristics of plastic deformation of an ultrafine-grained (UFG) Al–30wt.% Zn alloy
were investigated using depth-sensing micro-and nanoindentation. Emphasis was placed …
were investigated using depth-sensing micro-and nanoindentation. Emphasis was placed …
New insights into plastic instability in precipitation strengthened Al–Li alloys
H Ovri, ET Lilleodden - Acta Materialia, 2015 - Elsevier
A mechanistic model that describes the microscopic mechanisms underlying plastic
instability in precipitation strengthened Al–Li based alloy systems is proposed in this work …
instability in precipitation strengthened Al–Li based alloy systems is proposed in this work …