Periodic publications have been published that address advances in evolved gas analysis
techniques, because the correct interpretation for the mechanism of a thermally induced …

Bentonite is an important clay for preparation of adsorbents for potential treatment of
industrial effluents. However, due to its natural occurrence as fine particles and swelling …

The yoke is a safety-critical component of the coupler assembly of railway freight cars and is
responsible for absorption of impact loads during service. The present study investigates the …

Pengecoran logam adalah proses yang menghasilkan produk, dengan menggunakan
media cetakan pasir greensand. Cetakan pasir greensand mudah dibuat dan dapat didaur …

Greensand is a widely-used material to produce sand moulds in high production, mainly for
iron casting applications. Several authors have studied the high temperature behavior of …

Drops of molten cast iron were placed on moulding sand substrates. The composition of the
forming gaseous atmosphere was examined. It was found that as a result of the cast iron …

Ragum merupakan alat mekanis yang biasa digunakan untuk memegang atau mencekam
benda kerja dengan memanfaatkan poros ulir untuk membuka dan menutup rahang cekam …

In sand moulds, at a distance of 3 mm from the metal-mould interface, the sensors of
temperature, and of oxygen and hydrogen content were installed. Temperature and the …

鋳造シミュレーションの動向と今後の展望 Page 1 鋳造シミュレーションの動向と今後の展望 265
レビュー 鋳造シミュレーションの動向と今後の展望 1.まえがき 鋳造シミュレーションは鋳造工業界の …