[HTML][HTML] Mechanical properties and microstructures of a modified Al–Si–Cu alloy prepared by thixoforming process for automotive connecting rods
The thixoforming process with feedstock preparation yields a fine microstructure and
enhanced mechanical properties relative to other traditional casting processes. However …
enhanced mechanical properties relative to other traditional casting processes. However …
Effect of partial rolling on the microstructure and mechanical properties of laser-TIG hybrid welded joints of 7075-T6 aluminum alloy
G Song, Z Wang, Z Liu, L Liu - The International Journal of Advanced …, 2022 - Springer
In this study, both the “softening” behavior and the effect of the partial rolling on
characteristics of welded joints of 7075-T6 aluminum (Al) alloy with a laser-tungsten inert …
characteristics of welded joints of 7075-T6 aluminum (Al) alloy with a laser-tungsten inert …
Grain structure, crystallographic texture, and hardening behavior of dissimilar friction stir welded aa5083-o and aa5754-h14
This work investigated the effect of friction stir welding (FSW) tool rotation rate and welding
speed on the grain structure evolution in the nugget zone through the thickness of the 10 …
speed on the grain structure evolution in the nugget zone through the thickness of the 10 …
Microstructure evolution and deformation behavior of TIG welded 7075-T6 aluminum alloy followed by partial hot rolling
Z Wang, Z Zhang, Q Lang, G Song, L Liu - Journal of Manufacturing …, 2023 - Elsevier
Welded joints of 7075-T6 aluminum alloys had poor formability in comparison to the base
metal (BM) due to softening behavior and a performance gradient. A partial hot rolling (PHR) …
metal (BM) due to softening behavior and a performance gradient. A partial hot rolling (PHR) …
Mechanical property improvement in dissimilar friction stir welded Al5083/Al6061 joints: effects of post-weld heat treatment and abnormal grain growth
The 5083 and 6061 (T6) aluminum (Al) alloys are widely used in transportation industries
and the development of structural designs because of their high toughness and high …
and the development of structural designs because of their high toughness and high …
Microstructural evolution, dislocation density and tensile properties of Al–6.5 Si–2.1 Cu–0.35 Mg alloy produced by different casting processes
Abstract Al–Si–Cu–Mg foundry alloys are used in casting process technologies. However,
their strength properties remain low due to their microstructural characteristics and porosity …
their strength properties remain low due to their microstructural characteristics and porosity …
Friction stir welding parameters: Impact of abnormal grain growth during post-weld heat treatment on mechanical properties of Al–Mg–Si welded joints
Friction stir welding (FSW) is an alternative method to join aluminum (Al) alloys in a solid-
state condition. However, the coarsening or dissolution of precipitation hardening phases in …
state condition. However, the coarsening or dissolution of precipitation hardening phases in …
Effect of tool pin geometry and process parameters during FSW of dissimilar alloys of Mg
Abstract Effect of two distinctive tool designs along with other tool related parameters
including speed of traverse of tool and offset distance of tool pin during friction stir welding of …
including speed of traverse of tool and offset distance of tool pin during friction stir welding of …
[HTML][HTML] Influences of graphene nanoplatelet addition and pin lengths on the microstructure and mechanical properties of 7075 aluminum alloy under friction stir spot …
This study investigated the impact of graphene nanoplatelets (GNPs) and pin lengths on the
mechanical properties and microstructure of AA7075 Al alloy in friction stir spot welded …
mechanical properties and microstructure of AA7075 Al alloy in friction stir spot welded …
Elimination of low-angle grain boundary networks in FeCrAl alloys with the electron wind force at a low temperature
MH Rahman, S Todaro, L Warner, D Waryoba… - Metals, 2024 - mdpi.com
Low-angle grain boundaries (LAGBs) accommodate residual stress through the
rearrangement and accumulation of dislocations during cold rolling. This study presents an …
rearrangement and accumulation of dislocations during cold rolling. This study presents an …