Abstract Effect of phase structure and composition on the passive film properties and pitting
behavior of L2 1-strengthened (CoCrFeNi) 86 Al 7 Ti 7 high-entropy alloy (HEA) in 3.5 wt …

With inevitable introduction of Fe in aluminum processing, a method for achieving high-
value utilization of iron-bearing aluminum-based alloys is essential. Aluminum–air batteries …

Surface films of AA2024-T3 after immersion in 0.1 M NaCl for 14 days, 6 months, and 1 year
have been investigated using scanning electron microscopy. The corrosion product …

The pitting potential, intrinsic surface acidity, point of zero charge of passive film on Al are
studied using first-principles calculations to establish their relationships. Influences of …

Pitting and galvanic corrosion of 2205 DSS with σ phase were investigated in the presence
of Pseudomonas aeruginosa. Pitting corrosion was accelerated by σ phase, and further …

Laser powder bed fusion (LPBF) was performed on feedstock-modified 316L stainless steel
powder with 1 and 2 vol% carbon nanotubes (CNT). The corrosion resistance was evaluated …

Nanocrystalline supersaturated Al-V alloys produced by high-energy ball milling have been
reported to exhibit enhanced corrosion resistance and mechanical properties compared to …

The time-dependent corrosion behavior of pure aluminum (Al) in a chloride-containing
environment was investigated using various electrochemical and characterization …

The heterogeneous microstructure in bulk aluminum (Al) alloys or coatings, comprising an α-
Al solid solution matrix and coarse intermetallic compounds (IMCs), poses a challenge in …

Laser powder bed fusion (LPBF), a metal additive manufacturing technique, was conducted
on feedstock-modified 316L stainless steel (316L) powder produced by ball-milling of …