Tensile creep tests were performed along the normal direction on the as-solutioned (AS)
and as-aged (AA) samples of a commercial ZK60 alloy in this work. The results showed that …

The effects of original orientations on the dynamic recrystallization (DRX) behaviors of a hot-
rolled Mg-1.0 wt% Ca plate were investigated in this work. Using hot compression along the …

Microstructure and tensile behaviors of AZ31 magnesium alloy prepared by friction stir
processing (FSP) were investigated. The results show that microstructure of the AZ31 hot …

In this study, the effects of twinning time node on the creep resistance of an extruded Mg-
2wt% Y sheet were investigated. Pre-compression with a low strain was applied along the …

The creep properties and creep microstructure evolution of Mg-2.49 Nd-1.82 Gd-0.19 Zn-0.4
Zr alloy were investigated as a function of creep stresses and creep temperatures. It was …

Isothermal section of Mg–Zn–Zr ternary system at 345∘ C has been determined by X-ray
diffraction, differential scanning calorimetry and scanning electron microscopy assisted with …

In this study, the effect of adding 3 wt.% of light (Ce) and heavy (Y) rare earth elements on
the microstructure and hot compression behavior of Mg-6 wt.% Zn-0.5 wt.% Zr (ZK60) …

The present study investigates the variation of flow stress and microstructural evolution with
strain for ZK60 magnesium alloy. A new constitutive equation was used to model the flow …

Creep and superplasticity were investigated by testing a fine-grained extruded Mg–Zn–Zr
magnesium alloy under a wide range of applied stress in the temperature range between …

The rare-earth compounds in Mg-Zn-Gd-Zr alloy were quantitatively studied by using phase
separation technique, and the effects of rare-earth elements on the formation of compounds …