High-velocity compaction of aluminum powders has been studied experimentally using a
novel processing technique, called gas mixture detonation method. According to this new …

Abstract Series experiments were performed to investigate the cold die compaction
behaviors of Ag35Cu32Zn33 mixed metal powders to manufacture thin sheet of cadmium …

Finite element (FE) simulations are frequently used nowadays in order to analyse powder
compaction and sintering, for example, when determining the shape of a cutting blank insert …

Material parameter curves in an advanced material model describing compaction of spray
dried cemented carbide powder are determined successfully based on a general approach …

The rolling forming process of aluminum alloy composite pipes filled with iron powder is a
highly complex coupled deformation process. In actual production, the performance of the …

The deformation mechanisms in powder compaction can be described by a constitutive
model, which is the cornerstone for modeling the powder compaction process by finite …

将Drucker-Prager/Cap 塑性模型引入到高硬度W-Cu20 粉末轧制有限元分析中,
利用巴西圆盘试验, 单轴压缩试验以及模压试验得到Drucker-Prager/Cap 塑性模型参数 …

A novel process method combines powder compaction and sintering was employed to
fabricate thin sheets of cadmium-free silver based filler metals, the compaction densification …

基于粉末连续体, 运用MSC. Marc 有限元软件对粉末净成形压制工艺进行优化,
并对减重齿轮的结构设计进行数值模拟. 通过与实验数据对比分析, 验证了材料模型及仿真模拟 …

The Drucker-Prager/Cap plasticity model was introduced into the finite element simulation
analysis of W-Cu20 alloy powder rolling. The parameters of Drucker-Prager/Cap model …