Abstract Ti/Al/Ti laminated composites were prepared by hot-pressing and hot-rolling.
Subsequent annealing was used to adjust Ti/Al interface. Then the influence of interface on …

This research aims to discuss the effect of annealing time and temperature on the interfacial
and mechanical properties in Al5052/Cu multilayer composites processed by accumulative …

In this work, a novel extrusion die for embedding the continuous Ti wire into the aluminum
alloy is developed, and the extruded composite bar is obtained. The multi-scale interface …

Abstract In this work, Al/Ti composite structures are obtained by isothermal compression at
550° C and then annealed at 500–650° C, respectively. The microstructure, elemental …

In this study, microstructure and mechanical behavior of Mg/Al composite plates with Ti foil
interlayer were systematically studied, with a great emphasis on the effect of different …

Abstract The Ti/Al laminated metal components have attracted considerable attention due to
their impressive strength and lightweight properties, positioning them as promising materials …

In this study, the bioinspired laminated composites with alternating soft Al layers and hard
SiCp/Al were fabricated through the tape casting followed by pressure infiltration. In-situ …

In this article, new insights towards the layer growth phenomenon of TiAl 3 phase in
alternative Ti/Al based multilayer metal intermetallic laminate is discussed. Ti/Al multilayered …

Abstract In present research, Al-6061/Ti-TA1/Al-6061 multilayered sheets were prepared by
accumulative roll bonding at 400℃, 450℃ and 500℃, and then the fabricated sheets were …

A technology for producing a new homogeneous Ti–20Nb–13Ta–5Zr alloy has been
developed. It is shown that the alloy is single-phase with a β-Ti type crystal lattice. The alloy …