Methods that are used in regenerative medicine rely on the inherent ability of living
organisms to regenerate their tissue. If the size (volume) of a defect exceeds some critical …

Ceramic samples based on β-calcium pyrophosphate β-Ca2P2O7 were prepared from
powders of γ-calcium pyrophosphate γ-Ca2P2O7 with preset molar ratios Ca/P= 1, 0.975 …

Triple superphosphates [TSPs, Ca (H2PO4) 2· H2O] were produced by exothermic reactions
of oyster shells and different concentrations of phosphoric acid (10, 20, 30, 40, 50, 60, and …

Biocompatibility of ceramic materials in Ca2P2O7-Ca (PO3) 2 system was investigated
using different methods, including in vitro and in vivo tests. Ceramic materials in the …

The goal of this research is to investigate the effect of SrO and La2O3 addition on the
crystallization characteristics and sintering behavior of polyphosphate glasses. Differential …

CaP coatings were hydrothermally deposited on the AZ31 magnesium alloy in rection
mixture containing ammonium or potassium ions. CaP coatings were deposited on AZ31 …

Nanoscale powders of hydrated Ca2P2O7, CaCO3, and a product of mixed-anionic
composition containing P2O74− and CO32− anions were synthesized from aqueous …

Microporous ceramic material, based on β-tricalcium phosphate β-Ca3 (PO4) 2 with grain
size 2–5 μm, pore size smaller than 10 mm, and density 1.22 g/cm3 corresponding to~ 40 …

β-Tricalcium phosphate (β-Ca3 (PO4) 2) based ceramics with a relative density of 20–21%,
grain size from 200 to 600 nm, and compressive strength from 1.6 to 1.8 MPa have been …

Ceramic materials in Na2O-CaO-P2O5 system were obtained by firing cement-salt stone
made from pastes based on powder mixtures including calcium citrate tetrahydrate Ca3 …