[PDF][PDF] Atomic Scale Models for RBa2Cu3O6.5 and R1-XPrXBa2Cu3O6.5 Compounds (R=Y and Lanthanides).
A Chroneos, IL Goulatis, RV Vovk - Acta Chimica Slovenica, 2007 - acta-arhiv.chem-soc.si
Atomic scale simulation techniques based on energy minimization have been employed to
study the structural parameters of a range of orthorhombic RBa2Cu3O6. 5 and R1 …
study the structural parameters of a range of orthorhombic RBa2Cu3O6. 5 and R1 …
X-ray diffraction and Raman studies on Ho: Eu2O3
In this paper the structural parameters of mixed rare earth sesquioxides (Eu 1-x Ho x) 2 O 3
(0≤ x≤ 1) is reported for the first time. The oxide samples are characterized by angle …
(0≤ x≤ 1) is reported for the first time. The oxide samples are characterized by angle …
Development of a new series of buffer layers for REBCO coated conductors
Dense, smooth, pinhole-free and crack-free epitaxial films of a new series of REBiO3 (RE=
rare earth elements) compounds are prepared on single crystal LaAlO3 or SrTiO3 substrates …
rare earth elements) compounds are prepared on single crystal LaAlO3 or SrTiO3 substrates …
Residual stress analysis of multi-layered buffer layers on Ni substrate for YBCO coated conductor
CeO2/YSZ/CeO2 buffer layer structure is one of the preferred buffer layers for fabrication of
coated conductors. Textured CeO2/YSZ/CeO2 buffer layers are grown on biaxially textured …
coated conductors. Textured CeO2/YSZ/CeO2 buffer layers are grown on biaxially textured …
Rare-earth mixed oxide thin films as 100% lattice match buffer layers for YBa2Cu3O7− x coated conductors
Buffer layers with 100% lattice match with YBa2Cu3O7− δ (YBCO) were prepared from
mixed rare-earth-oxides applying a simple sol–gel process and dip-coating method …
mixed rare-earth-oxides applying a simple sol–gel process and dip-coating method …
Sm-doped CeO2 single buffer layer for YBCO coated conductors by polymer assisted chemical solution deposition (PACSD) method
G Li, MH Pu, RP Sun, WT Wang, W Wu, X Zhang… - Journal of alloys and …, 2008 - Elsevier
An over 150nm thick Sm0. 2Ce0. 8O1. 9− x (SCO) single buffer layer has been deposited on
bi-axially textured NiW (200) alloy substrate. Highly in-plane and out-of-plane oriented …
bi-axially textured NiW (200) alloy substrate. Highly in-plane and out-of-plane oriented …
Structural and magnetic properties of Co-doped Er2O3 nanoparticles
Er 2− x Co x O 3 (x= 0.00, 0.04, 0.10, 0.30, 0.4) solutions were synthesized by the sol–gel
technique using erbium 2, 4 pentadionate and cobalt acetylacetonate dissolved in methanol …
technique using erbium 2, 4 pentadionate and cobalt acetylacetonate dissolved in methanol …
YbBa/sub 2-x/Sr/sub x/Cu/sub 3/O/sub 7-/spl delta//coated conductor development by sol-gel process
L Arda, S Aktas, YS Hascicek - IEEE transactions on applied …, 2005 - ieeexplore.ieee.org
YbBa/sub 2-x/Sr/sub x/Cu/sub 3/O/sub 7-/spl delta//coated conductors were grown on
Gd/sub 1.8/Ho/sub 0.2/O/sub 3/buffer layered biaxially textured-Ni (100) substrates by the …
Gd/sub 1.8/Ho/sub 0.2/O/sub 3/buffer layered biaxially textured-Ni (100) substrates by the …
Epitaxial growth of YSZ buffer layer for YBa2Cu3O7− δ coated conductor by reel-to-reel pulsed laser deposition
L Liu, Y Li, Z Zhao, H Liu - Applied Surface Science, 2010 - Elsevier
Yttria-stabilized zirconia (YSZ) buffer layers were deposited on CeO2 buffered biaxially
textured Ni–W substrate by reel-to-reel pulsed laser deposition (PLD) for the application of …
textured Ni–W substrate by reel-to-reel pulsed laser deposition (PLD) for the application of …
A Speedy Preparation of Ce0. 8Sm0. 2O1. 9-Δ Buffer Layer for YBa 2Cu3O7-δ Coated Conductors
X Zhu, H Zhang, Y Zhao - IEEE Transactions on Applied …, 2016 - ieeexplore.ieee.org
Economic, efficient, and energy-saving preparation techniques were the key factors for the
application of superconducting coated conductors. To shorten the preparation time and …
application of superconducting coated conductors. To shorten the preparation time and …