Corrosion and passive behavior of AlxCrFeNi3− x (x= 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment

Q Zhao, Z Pan, X Wang, H Luo, Y Liu, X Li - Corrosion Science, 2022 - Elsevier
The corrosion and passive behavior of the as-cast Al x CrFeNi 3− x (x= 0.6, 0.8, 1.0 in molar
ratio) high entropy alloys in 3.5 wt% NaCl solution at room temperature was investigated by …

Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH

Z Cui, S Chen, Y Dou, S Han, L Wang, C Man, X Wang… - Corrosion …, 2019 - Elsevier
Passivation and film chemistry of 2507 super duplex stainless steel in modified artificial
seawater (ASW) are investigated. Removal of dissolved oxygen decreases the electric field …

[HTML][HTML] Integrated computation of corrosion: Modelling, simulation and applications

C Dong, Y Ji, X Wei, A Xu, D Chen, N Li, D Kong… - Corrosion …, 2021 - Elsevier
In the last decade, integrated computation of corrosion has made significant progress
towards the atomic-scale clarification of corrosion mechanisms and computer-aided …

Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review

L Wang, C Dong, C Man, Y Hu, Q Yu, X Li - International Journal of …, 2021 - Springer
The high strength martensite steels are widely used in aerospace, ocean engineering, etc.,
due to their high strength, good ductility and acceptable corrosion resistance. This paper …

Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores

Z Duan, C Man, C Dong, Z Cui, D Kong, X Wang - Corrosion Science, 2020 - Elsevier
In this study, the pitting behaviors of wrought and SLM 316L SSs (stainless steels) are
comparatively investigated under the conditions of different aggressiveness. The …

The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid

C Man, C Dong, T Liu, D Kong, D Wang, X Li - Applied Surface Science, 2019 - Elsevier
Recently, the stainless steels produced by selective laser melting (SLM) have received
considerable attention in biomedicine, but their corrosion behaviors in the body environment …

[HTML][HTML] Effects of Cr and Ni on the microstructure and corrosion resistance of high-strength low alloy steel

D Wang, Q Zhong, J Yang, S Zhang - Journal of Materials Research and …, 2023 - Elsevier
The effects of Cr and Ni on the microstructure and corrosion resistance of high-strength low
alloy steel (HSLAs) were investigated by optical microscopy, scanning electron microscopy …

Insight into electrochemical passivation behavior and surface chemistry of 2205 duplex stainless steel: effect of tensile elastic stress

L Chen, W Liu, B Dong, Y Zhao, T Zhang, Y Fan… - Corrosion …, 2021 - Elsevier
The effect of tensile elastic stress on passivation behavior and surface chemistry of 2205
duplex stainless steel is investigated. Elastic stress increases the potential drop at the …

The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values

H Zhang, C Man, C Dong, L Wang, W Li, D Kong… - Corrosion …, 2021 - Elsevier
The corrosion behavior of the SLM and wrought Ti6Al4V are comparatively investigated. The
critical NaF concentrations of SLM Ti6Al4V in the three cases of pH= 2, 4 and 6 are 0.0020 …

Hydrogen effects on passivation and SCC of 2205 DSS in acidified simulated seawater

Y Pan, B Sun, Z Liu, W Wu, X Li - Corrosion Science, 2022 - Elsevier
In this work, hydrogen effects on passivation and stress corrosion cracking (SCC) of 2205
duplex stainless steel (DSS) in acidified seawater were investigated. Results show …