Biomaterials have been widely used in tissue engineering applications at an increasing rate
in recent years. The increased clinical demand for safe scaffolds, as well as the diversity and …

Osteoporotic bone defects are serious medical problems due to their sparse bone structure,
difficulty in restoration and reconstruction, and high recurrence rates, which also result in …

To investigate the effect of pH on corrosion and fatigue crack growth of ZK60 magnesium
alloy, the corrosion and fatigue crack growth experiments with cyclic sinusoidal waveform in …

Abstract The as-cast Mg-4Zn-2Gd-0.5 Ca alloy mainly contained I phase and W phase, while
the I phase dissolved into Mg substrate after homogenization treatment which improved the …

In this in‐vitro study, the effectiveness of experimental pure nano‐hydroxyapatite (nHAP)
and 1%, 2%, and 3% F¯ doped nano‐HAp on dentine tubule occlusion was investigated …

In order to study the corrosion resistance of extruded magnesium alloys, the Mg–4Zn–2Gd–
0.5 Ca alloy was extruded at the speed of 0.01–0.1 mm/s with the temperature of 280–360° …

Magnesium (Mg) has emerged as potential implant material owing to its property of
biodegradation. The roadblock to the commercial use of Mg as implant material is its fast …

Magnesium (Mg) alloy which benefits from biodegradability and mechanical characteristics
offers great potential for the development of degradable hemostatic clips. However, the …

Most of the bone implants used are either expensive or not biocompatible or bioresorbable
and are a source of great concern. A synthetic bioceramic compound called hydroxyapatite …

Magnesium and its alloys are promising biodegradable materials because of their light
weight and superior mechanical properties. However, the high corrosion susceptibility of …