Plasma transferred arc boriding of a low carbon steel: microstructure and wear properties
Borided coatings on AISI 1018 steel with different boron contents were produced using
plasma transferred arc (PTA) melting. The thickness of the coatings ranged from 1 to 1.5 mm …
plasma transferred arc (PTA) melting. The thickness of the coatings ranged from 1 to 1.5 mm …
Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam irradiation
J Lee, K Euh, JC Oh, S Lee - Materials Science and Engineering: A, 2002 - Elsevier
Stainless steel-base surface composites reinforced with TiC particles were fabricated by
high-energy electron beam irradiation. Three kinds of powder/flux mixtures: TiC,(Ti+ C), and …
high-energy electron beam irradiation. Three kinds of powder/flux mixtures: TiC,(Ti+ C), and …
Improvement of hardness and wear resistance in SiC/Ti–6Al–4V surface composites fabricated by high-energy electron beam irradiation
JC Oh, E Yun, MG Golkovski, S Lee - Materials Science and Engineering: A, 2003 - Elsevier
This study is concerned with the microstructural analysis and the improvement of hardness
and wear resistance of SiC/Ti–6Al–4V surface composites fabricated by high-energy …
and wear resistance of SiC/Ti–6Al–4V surface composites fabricated by high-energy …
Heat transfer–a review of 1999 literature
RJ Goldstein, ERG Eckert, WE Ibele… - International journal of …, 2001 - Elsevier
The present review is intended to encompass the English language heat transfer papers
published in 1999. The papers have been placed into a number of subject categories. While …
published in 1999. The papers have been placed into a number of subject categories. While …
Production of Fe–B–TiB2 metal matrix composites on steel surface
M Darabara, GD Papadimitriou, L Bourithis - Surface and Coatings …, 2006 - Elsevier
Metal Matrix Composites (MMC) with boron reinforcement exhibit significant increase in the
mechanical strength and wear characteristics compared to matrix alloys. Titanium Diboride …
mechanical strength and wear characteristics compared to matrix alloys. Titanium Diboride …
Correlation of microstructure with hardness and fracture properties of (TiC, SiC)/Ti–6Al–4V surface composites fabricated by high-energy electron-beam irradiation
JC Oh, S Lee - Surface and Coatings Technology, 2004 - Elsevier
Correlation of microstructure with hardness and fracture toughness of (TiC, SiC)/Ti–6Al–4V
surface composites fabricated by high-energy electron-beam irradiation was investigated in …
surface composites fabricated by high-energy electron-beam irradiation was investigated in …
Improvement of high-temperature hardness of (TiC, TiB)/Ti–6Al–4V surface composites fabricated by high-energy electron-beam irradiation
E Yun, K Lee, S Lee - Surface and Coatings Technology, 2004 - Elsevier
The objective of this study is to investigate microstructure, hardness and high-temperature
hardness of five kinds of (TiC, TiB)/Ti–6Al–4V surface composites fabricated by high-energy …
hardness of five kinds of (TiC, TiB)/Ti–6Al–4V surface composites fabricated by high-energy …
Tribological evaluation of Fe–B–TiB2 metal matrix composites
M Darabara, GD Papadimitriou, L Bourithis - Surface and Coatings …, 2007 - Elsevier
Iron and titanium borides have been widely used for the production of metal matrix
composites (MMC). The majority of the studies focus on the Fe–TiB2 and/or the Fe–TiB2 …
composites (MMC). The majority of the studies focus on the Fe–TiB2 and/or the Fe–TiB2 …
Improvement of the hardness and wear resistance of (TiC, TiN)/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
JC Oh, S Lee, MG Golkovski - Metallurgical and Materials Transactions A, 2001 - Springer
This study is concerned with the microstructural analysis and improvement of the hardness
and wear resistance of Ti-6Al-4V surface-alloyed materials fabricated by a high-energy …
and wear resistance of Ti-6Al-4V surface-alloyed materials fabricated by a high-energy …
Effect of tempering on hardness improvement in a VC/steel surface-alloyed material fabricated by high-energy electron-beam irradiation
K Euh, YC Kim, K Shin, S Lee, NJ Kim - Materials Science and Engineering …, 2003 - Elsevier
The present study is concerned with the tempering effect in improving the hardness of a
vanadium carbide (VC)/carbon steel surface-alloyed material fabricated by high-energy …
vanadium carbide (VC)/carbon steel surface-alloyed material fabricated by high-energy …