Thermophysical properties of liquid chlorides from 600 to 1600 K: Melt point, enthalpy of fusion, and volumetric expansion

SS Parker, A Long, C Lhermitte, S Vogel… - Journal of Molecular …, 2022 - Elsevier
Melt point, enthalpy of fusion, and volumetric expansion of single-and multi-component
liquid chlorides {NaCl, KCl, LiCl, MgCl 2, CaCl 2, UCl 3} were measured experimentally …

Novel thermoelectric generator heat exchanger for indirect heat recovery from molten CuCl in the thermochemical Cu–Cl cycle of hydrogen production

A Mohammadi, OA Jianu - International Journal of Hydrogen Energy, 2023 - Elsevier
The looming threat of global warming has elicited efforts to develop reliable sustainable
energy resources. Hydrogen as a clean fuel is deemed a potential solution to the problem of …

MgO/Molten salt interfacial thermal transport and its consequences on thermophysical property enhancement: A molecular dynamics study

F Liang, X Wei, W Wang, J Ding, S Liu - … Journal of Heat and Mass Transfer, 2023 - Elsevier
The solid-liquid interface between molten salt and solid oxides is ubiquitous in the molten
salt nanocomposite with enhanced heat storage and transfer properties for concentrating …

Double pipe TEG-based heat exchanger for indirect heat recovery from molten CuCl without phase change in the thermochemical Cu–Cl cycle of hydrogen production

A Mohammadi, OA Jianu - International Journal of Hydrogen Energy, 2023 - Elsevier
Hydrogen, as a clean fuel, has the potential to revolutionise scientists and engineers' search
for a more sustainable energy source to alleviate detrimental effects of global warming …

[HTML][HTML] A Comprehensive Review of Mixed Convective Heat Transfer in Tubes and Ducts: Effects of Prandtl Number, Geometry, and Orientation

MF Amran, SM Sultan, CP Tso - Processes, 2024 - mdpi.com
This paper presents a comprehensive review of mixed convective heat transfer phenomena
involving fluids with varying Prandtl numbers, specifically focusing on their behavior in …

Numerical study on heat transfer characteristics of molten salt in annular channel with wire coil

Y Yang, M Li, Y Zou, J Chen - Applied Thermal Engineering, 2021 - Elsevier
In order to develop a heat transfer enhancement technique for molten salt heat exchanger,
Fluent simulation is carried out to investigate the molten salt flow and heat transfer …

Mixed convective heat transfer of medium-Prandtl-number fluids in horizontal circular tubes

S Zhang - International Journal of Heat and Mass Transfer, 2022 - Elsevier
Studies on mixed convective heat transfer or mixed convection of laminar flows in horizontal
circular tubes are normally restricted to fluids of low or high Prandtl numbers, such as air or …

Advanced flow and temperature measurements in a forced convection molten salt test loop

O Arora, B Lancaster, SR Yang, R Vaghetto… - Annals of Nuclear …, 2021 - Elsevier
The elevated temperatures and corrosive environment typical of molten salt reactors'
operating conditions may pose challenges to flow and temperature measurements …

Reversible solid oxide cell system with thermocline-type thermal energy storage: Numerical and techno-economic analysis

H Hwang, Y Lim, W Choi - Energy Conversion and Management, 2024 - Elsevier
In this study, a novel system− a reversible solid oxide cell system with a thermocline-type
thermal energy storage is proposed to address the limits of green hydrogen. This system …

Mixed convective and radiative heat transfer of LiF-BeF2-ThF4-UF4 in a vertical circular tube

S Zhang, X Sun - Annals of Nuclear Energy, 2023 - Elsevier
Molten salts are promising fluids for applications involving heat transfer and thermal energy
storage. The buoyancy effect and radiative heat transfer effect are frequently ignored in …