Transition between shear and punching in reinforced concrete slabs: Review and predictions with ACI code expressions
AMD de Sousa, EOL Lantsoght… - ACI Structural Journal, 2023 - research.tudelft.nl
One-way slabs under concentrated loads may fail by one-way shear, two-way shear, flexure,
or a combination of these modes. This paper reviews shear and punching shear-failure …
or a combination of these modes. This paper reviews shear and punching shear-failure …
Development of the One-Way Shear Design Provisions of ACI 318-19 for Reinforced Concrete.
The philosophy of the one-way reinforced concrete (RC)(that is, non-prestressed) shear
design provisions in the" Building Code Requirements for Structural Concrete (ACI 318-14)" …
design provisions in the" Building Code Requirements for Structural Concrete (ACI 318-14)" …
[HTML][HTML] Time-history analysis of aggregate interlock in reinforced concrete beams without stirrups
Different shear-transfer actions on concrete beams have been well-studied in many
research works to understand the mechanical behavior of RC beams failing in shear. In this …
research works to understand the mechanical behavior of RC beams failing in shear. In this …
Shear size effect in simply supported RC deep beams
The shear size effect refers to the phenomenon that the shear strength of reinforced concrete
(RC) beams decreases as the beam depth increases. The shear strength of RC deep beams …
(RC) beams decreases as the beam depth increases. The shear strength of RC deep beams …
Distributed Sensing in Large Reinforced Concrete Shear Test.
A large reinforced concrete (RC) beam designed to fail in shear was experimentally tested
and monitored with distributed sensing technologies. Fiber-optic sensors (FOS) were used …
and monitored with distributed sensing technologies. Fiber-optic sensors (FOS) were used …
[HTML][HTML] Shear behaviour of beams strengthened using different Ni-Ti-Nb shape memory alloy wire configurations and design proposal based on the compression …
Shear strengthening of existing structures is often required in cases where shear strength is
deficient because shear failures in RC members are associated with brittle collapse. In …
deficient because shear failures in RC members are associated with brittle collapse. In …
Assessing beam shear behavior with distributed longitudinal strains
The demand on the longitudinal reinforcement due to shear has been traditionally based on
statics but has rarely been measured. Empirical assumptions needed for the concrete …
statics but has rarely been measured. Empirical assumptions needed for the concrete …
Mechanical response of small-scale 3D-printed steel-mortar composite beams
This paper presents the mechanical properties of composite beams additively manufactured
by 3D-printing of layers of mortar on top of custom-designed (also 3D-printed) steel plates …
by 3D-printing of layers of mortar on top of custom-designed (also 3D-printed) steel plates …
A theoretical model for prediction of shear strength in reinforced concrete beams with discrete or continuous transverse reinforcement
M Zakerinejad, M Soltani - Structures, 2022 - Elsevier
Shear failure of reinforced concrete falls into the category of brittle and undesirable failure
modes and has caused catastrophic incidents in structures and infrastructures throughout …
modes and has caused catastrophic incidents in structures and infrastructures throughout …
Comparative assessment of shear strength equations for reinforced concrete
Several methods for predicting the one-way shear strength of reinforced concrete beams
and one-way slabs are available in the literature. An assessment regarding the accuracy of …
and one-way slabs are available in the literature. An assessment regarding the accuracy of …