Strength-ductility trade-off is usually an inevitable scenario in most engineering materials,
including metal matrix composites (MMCs) where reinforcement particles significantly …

The effect of equal channel angular pressing (ECAP) and further cold upsetting (CU)
process on the kinetics of precipitation during aging of solid solution treated 7050 Al alloy …

To study the effect of the aging state on the low-cycle fatigue (LCF) performance of 7075 Al
alloy, LCF experiments with different strain amplitudes (Δε/2= 0.5%-Δε/2= 0.9%) were …

Abstract Effects of Ag addition on the age hardening and precipitation behavior of aluminum
alloy 7075 were investigated. The transmission electron microscopy (TEM) and atom probe …

In the present work, the effects of solution quenching (SQ), under-aging (UA), peak-aging
(PA), and over-aging (OA) on the dynamic tensile properties of 7075 aluminum alloy have …

A recurrent challenge with aluminum alloys is their longstanding trade-off between
mechanical strength and formability. Recently recyclability has put further pressure on the …

Low cycle fatigue (LCF) tests, uniaxial symmetrical (R=− 1) push-pull, were performed on the
friction stir welded dissimilar 2024-to-7075 aluminum alloy joints at various strain …

The enhancement of cryogenic plasticity for some aluminum alloys has attracted broad
attention, which provides a new approach to the formability improvement of high-strength …

In this study, the effect of trace addition of Ag on the microstructure, tensile strength, and
fracture toughness of novel Al-Mg-Zn alloys was evaluated using transmission electron …

The hot deformation behavior of an Al-Mg-Si-Zr-Mn alloy was investigated by performing
uniaxial compression tests over a temperature range of 400–550° C and strain-rate range of …