This manuscript describes, defines, and discusses the process of cold sintering, which can
consolidate a broad set of inorganic powders between room temperature and 300° C using …

Despite sintering has a history even longer than human civilization (its discovery dates back
at least to 25,000 years ago), in the past decade, new exciting challenges have emerged in …

With the cold sintering process (CSP), it was found that adding acetic acid to an aqueous
solution dramatically changed both the densities and the grain microstructures of the ZnO …

Despite the fact that the methanol synthesis process includes industrially some of the most
important catalytic chemical reactions, it is still not clear how different gaseous species …

The increasing environmental concerns due to anthropogenic CO2 emissions have called
for an alternate sustainable source to fulfill rising chemical and energy demands and reduce …

The sintering behavior of nanocrystalline ZnO was investigated at only 250° C. Densification
was achieved by the combined effect of uniaxial pressure and the addition of water both in a …

Cu/ZnO/Al2O3 catalysts used to synthesize methanol undergo extensive deactivation during
use, mainly due to sintering. Here, we report on formulations wherein deactivation has been …

Highly efficient energy conversion and storage technologies such as high‐temperature solid
oxide fuel and electrolysis cells, all‐solid‐state batteries, gas separation membranes, and …

In conventional flash sintering, the current rises nonlinearly to a set current limit,
accompanied by a spike in the power density. This sudden power spike may cause hot spot …

Water can trigger flash sintering of ZnO powder pellets at room temperature to achieve~
98% of the theoretical density in 30 s without any external furnace heating. The specimen …