Abstract The CrN monolayer and CrN/AlN nano-multilayer coating were successfully
fabricated by reactive magnetron sputtering on F690 steel. The results show that CrN …

In this work, the influence of vanadium addition to TiSiN/CrV x N multilayer coatings,
deposited by DC reactive magnetron sputtering, on the microstructure, mechanical …

AISI 316L steel is often used in materials applied toward nuclear power but are subjected to
pitting corrosion in a marine environment. In this study,(Cr, W, Al, Ti, Si) N multilayer coatings …

In this study, a series of ZrCrW (C) N multilayer coatings with various transition layers were
deposited on AISI304 stainless steel using cathodic vacuum-arc deposition in N 2–C 2 H 2 …

Cr-Si-N thin films were successfully fabricated by a hybrid deposition system containing a
high power impulse magnetron sputtering (HiPIMS) and a radio frequency (RF) magnetron …

In this study, CrAlSiN coatings with nitrogen contents ranging from approximately 42 to 54
at.% were deposited and subsequently exposed to temperatures of 700 or 900° C for 2 h in …

A direct link between the microstructure and mechanical properties of CrSiN coatings with
varying Si contents was established by examining their microstructural evolution and …

In this study, CrYN coatings were prepared using multi-arc ion plating at various substrate
bias voltages (− 50 V,− 100 V,− 150 V, and− 200 V). X-ray diffractometry and scanning …

The combine influence of substrate temperature and bias on microstructure and mechanical
properties of CrSiN film was examined. The silicon content and phase constitutions of the …

Protective coatings that retard ionic diffusion at high temperature in the presence of steam
are of interest for the energy industry. A CrAlSiN monolayer and two CrN/AlSiN coatings of …