The microstructure/texture evolution and strengthening of 316 L-type and 304 L-type
austenitic stainless steels during cold rolling were studied. The cold rolling was …

In the present work, microstructure and texture evolution during multi-step cross rolling of a β-
Ti alloy was investigated. The as-received samples were cross rolled in a laboratory rolling …

The effect of deformation on the evolution of crystallographic texture in a Ti-15V-3Cr-3Sn-3Al
(Ti-15333) alloy after unidirectional cold rolling was studied experimentally and numerically …

In two phase materials like duplex stainless steels that contain both the phases in nearly
equal proportions, the crystallographic texture in the phases is related by special orientation …

In the present study, effect of multistep cross rolling (MSCR) on microstructure, texture, and
magnetic properties has been investigated for UNS S32101 steel. UNS S32101 steel …

Deformation twinning is known to be one of the reasons that cause texture transition (copper
type to brass type) in single phase fcc materials and is studied extensively. The role of …

Cold radial forging is an efficient and high-precision process for producing rotary parts such
as axles and gun barrels, etc. 30SiMn2MoVA high strength alloy steel is a kind of fine …

Microstructure evolution and texture development during cold rolling of a Ti15333 alloy were
systematically investigated in the present work. Texture was simulated using mean-field …

In the present investigation, ER2594 (conventional) and ER2595 (consisting of additional
Cu and W) electrodes were used to produce butt joints of 5.5 mm thick super duplex …

In the present investigation, the plastic flow curves and work softening behaviour of a dual
phase Fe–Cr–Ni alloy during hot deformation (low to intermediate temperature range, 948 K …