[HTML][HTML] Initial formation of corrosion products on pure zinc in saline solution

Y Meng, L Liu, D Zhang, C Dong, Y Yan, AA Volinsky… - Bioactive materials, 2019 - Elsevier
Corrosion product formed on zinc sample during 2 weeks immersion in saline solution has
been investigated. The corrosion layer morphology as well as its chemical composition, was …

Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: Corrosion layer characterization

M Mouanga, P Berçot, JY Rauch - Corrosion Science, 2010 - Elsevier
The corrosion layer formed on zinc sample in 0.6 M NaCl and 0.5 M NaOH solution under
ambient conditions has been investigated. The corrosion layer morphology was analyzed …

[HTML][HTML] Optimizing the defensive characteristics of mild steel via the electrodeposition of ZnSi3N4 reinforcing particles

IG Akande, OO Oluwole, OSI Fayomi - Defence Technology, 2019 - Elsevier
The effect of Znsingle bondSi 3 N 4 deposition prepared via direct electrolytic co-deposition
on mild steel was studied as a result its inherent vulnerability to corrosion in an aggressive …

EIS and XPS investigations on the corrosion mechanism of ternary Zn–Co–Mo alloy coatings in NaCl solution

J Winiarski, W Tylus, B Szczygieł - Applied Surface Science, 2016 - Elsevier
The changes in composition of the corrosion products of electrodeposited ternary Zn–Co–
Mo alloy coatings on AISI 1015 steel during exposure to 0.5 mol dm− 3 NaCl solution were …

Comparative study on structure, corrosion properties and tribological behavior of pure Zn and different Zn-Ni alloy coatings

M Tafreshi, SR Allahkaram, H Farhangi - Materials Chemistry and Physics, 2016 - Elsevier
Abstract Zn and Zn-Ni alloy coatings were electrodeposited from sulfate based electrolytes.
The effect of alloys Ni content on morphology, microstructure, corrosion properties …

A comparative study on the corrosion of galvanized steel under simulated rust layer solution with and without 3.5 wt% NaCl

H Sun, S Liu, L Sun - International Journal of Electrochemical Science, 2013 - Elsevier
A comparative study of the corrosion behavior of galvanized steel under 3.5 wt% NaCl and
chloride-free simulated rust layer (SRL) solution was investigated using polarization curve …

Influence of the alloying component on the protective ability of some zinc galvanic coatings

N Boshkov, K Petrov, D Kovacheva, S Vitkova… - Electrochimica …, 2005 - Elsevier
The composition of the corrosion products of pure Zn galvanic coatings as well as of some
zinc alloys (Zn–Mn and Zn–Co) after treatment in selected free aerated model media (5 …

Electrodeposition of ZnCo alloy coatings on carbon steel and their corrosion resistance

JM Falcón, IV Aoki - Surface and Coatings Technology, 2024 - Elsevier
The development of Znsingle bondCo alloys appeared as alternative for obtaining layers
more resistant than the conventional zinc with a minimum increment of cost. The aim of this …

The advantage of ultrasound during electrodeposition on morphology and corrosion stability of Zn-Co alloy coatings

M Riđošić, E García-Lecina, A Salicio-Paz… - Transactions of the …, 2020 - Taylor & Francis
The influence of ultrasound agitation on the properties of electrodeposited Zn-Co coatings
was analysed and compared with coatings deposited by using magnetic stirring. The …

Cermet coatings obtained by electric spark alloying to increase service life of dental instruments

R Gvetadze, S Arutyunov, S Kryuchkov, M Antipov… - Ceramics …, 2024 - Elsevier
The article presents the results of our study of protective cermet coatings obtained by the
method of electric spark alloying on a dental instrument (excavator) using SHS (self …