The increasing demand for advanced energy storage solutions has fuelled an increasing
need for cutting-edge technologies that can provide high battery capacity, safety, and …

High temperatures (≥ 1100° C) and narrow temperature window (∼ 20° C) for sintering
dense K 0.5 Na 0.5 NbO 3 ceramics always deteriorate their electrical properties. Here, via …

New innovative approach to fabricate porous alumina ceramics by cold sintering process
(CSP) is presented using NaCl as pore forming agent. The effects of CSP and post …

Proton-conducting ceramic materials have emerged as effective candidates for improving
the performance of solid oxide cells (SOCs) and electrolyzers (SOEs) at intermediate …

Diatomite, a natural silicate‐based sedimentary rock, was densified by cold sintering at room
temperature and 150° C under various pressures (100, 200, and 300 MPa) and using …

Numerical models of solid-state and liquid-phase sintering of CaCO 3 at room temperature
are developed for applied static pressures as high as 280 MPa. Under the applied static …

For acoustic softening of solid materials, it has been suggested that the enhancement of
dislocation motion by ultrasonic irradiation plays some role. In order to study the role of …

Because of large differences in the processing temperature windows between ceramics and
polymers, the single‐step co‐sintering of microwave dielectric ceramic–polymer substrates …

Abstract Dense K0. 5Na0. 5NbO3 lead‐free ceramics were successfully fabricated by
combining cold sintering process (CSP) with annealing in air atmosphere or low pO2 …

Ceramics such as lead zirconate titanate (PZT) tend to dissolve incongruently, and thus
pose a challenge in the cold sintering process. Moist lead nitrate has previously been shown …