The heat treatment of Al–Si–Cu–Mg casting alloys
E Sjölander, S Seifeddine - Journal of materials processing technology, 2010 - Elsevier
The mechanical properties of aluminium–silicon casting alloys containing Cu and Mg are
known to be improved by heat treatment. Over 60 papers are reviewed here in order to …
known to be improved by heat treatment. Over 60 papers are reviewed here in order to …
Research Progress on Multi-Component Alloying and Heat Treatment of High Strength and Toughness Al–Si–Cu–Mg Cast Aluminum Alloys
M Zhang, Y Tian, X Zheng, Y Zhang, L Chen, J Wang - Materials, 2023 - mdpi.com
Al–Si–Cu–Mg cast aluminum alloys have important applications in automobile lightweight
due to their advantages such as high strength-to-weight ratio, good heat resistance and …
due to their advantages such as high strength-to-weight ratio, good heat resistance and …
Effect of heat treatment on microstructure and tensile properties of die-cast Al-Cu-Si-Mg alloys
The effects of T5 and T6 heat treatment on the microstructural development and mechanical
properties of newly developed die-cast Al-xCu-2.2% Si-1.1% Mg (x= 5, 6.6 and 10.6, in wt%) …
properties of newly developed die-cast Al-xCu-2.2% Si-1.1% Mg (x= 5, 6.6 and 10.6, in wt%) …
Ageing characteristics and high-temperature tensile properties of Al–Si–Cu–Mg alloys with micro-additions of Cr, Ti, V and Zr
Ageing characteristics and high temperature tensile properties of the Al–7Si–1Cu–0.5 Mg
(wt%) alloy modified with transition metals Cr, Ti, V and Zr, were tested. The modified alloy …
(wt%) alloy modified with transition metals Cr, Ti, V and Zr, were tested. The modified alloy …
Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys
M Zhang, K Liu, J Han, F Qian, J Wang… - Materials Today …, 2021 - Elsevier
Understanding the evolution of as-cast microstructure (especially eutectic Si and
intermetallics) in Al-Si-Mg alloys is critical for improving the mechanical properties because …
intermetallics) in Al-Si-Mg alloys is critical for improving the mechanical properties because …
Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al–Si alloys
In this work, the effects of Cr content (0–0.67 wt%) and heat treatment on the microstructure
evolution and high temperature (HT) tensile strength (350° C) of the Fe-containing eutectic …
evolution and high temperature (HT) tensile strength (350° C) of the Fe-containing eutectic …
Microstructure and mechanical properties of Al–Si cast alloy with additions of Zr–V–Ti
The microstructure and tensile properties at temperatures up to 300° C of an experimental Al–
7Si–1Cu–0.5 Mg (wt.%) cast alloy with additions of Ti, V and Zr were assessed and …
7Si–1Cu–0.5 Mg (wt.%) cast alloy with additions of Ti, V and Zr were assessed and …
Effect of Mn and heat treatment on improvements in static strength and low-cycle fatigue life of an Al–Si–Cu–Mg alloy
Tensile and low cyclic fatigue properties were used to assess the influence of Mn additions
and heat treatment on the performance of the Al–7Si–1Cu–0.5 Mg (wt%) alloy. As a …
and heat treatment on the performance of the Al–7Si–1Cu–0.5 Mg (wt%) alloy. As a …
Optimization of A354 Al-Si-Cu-Mg alloy heat treatment: Effect on microstructure, hardness, and tensile properties of peak aged and overaged alloy
S Toschi - Metals, 2018 - mdpi.com
The aim of the present work is the study of T6 heat treatment of A354 (Al-Si-Cu-Mg) casting
alloy. The heat treatment was optimized by maximizing mechanical strength of the alloy …
alloy. The heat treatment was optimized by maximizing mechanical strength of the alloy …
Monotonic and cyclic deformation behavior of the Al–Si–Cu–Mg cast alloy with micro-additions of Ti, V and Zr
Monotonic and cyclic tests were used to assess the influence of micro-additions of Ti, V and
Zr on the deformation behavior of the Al–7Si–1Cu–0.5 Mg (wt.%) alloy in as-cast and T6 …
Zr on the deformation behavior of the Al–7Si–1Cu–0.5 Mg (wt.%) alloy in as-cast and T6 …