Abstract Fully dense Si 3 N 4-ZrO 2 nano-composites, where ZrO 2 content varied from 0 to
30 vol%, were produced via Spark Plasma Sintering (SPS) at 1600° C under the pressure of …

SiC whiskers (SiC w)-reinforced α/β-SiAlON ceramic tool materials were synthesized via
spark plasma sintering (SPS). A comprehensive study was conducted on densification …

Fully dense β-SiAlON ceramics with excellent mechanical properties and good thermal
conductivity were fabricated by two-stage spark plasma sintering (SPS) processes without …

TiN-doped Sialon matrix composites are potential candidates for high temperature
applications due to their excellent mechanical and tribological properties. The objectives of …

MgAl 2 O 4-SiC composites were prepared under flowing nitrogen at 1500° C by using MgAl
2 O 4 powder, SiC powder, Al powder and Si powder as raw materials. Through …

Single-and graded-composite coatings of Ni35+ tungsten carbide (WC), Ni35+ original
sialon powders (OSP), and Ni35+ WC+ OSP were prepared by laser cladding on 45 steel …

Oxonitridoaluminosilicates (SiAlON) are renowned in advanced ceramics for their
exceptional properties: high temperature stability, excellent oxidation resistance, and good …

This work aims to investigate the effect of hBN on the friction and wear resistance of Sialon
composite. Sialon and its composite with 10 wt% hBN were fabricated by SPS sintering. The …

Abstract Porous β-Si 3 N 4/Si 5 AlON 7 composite ceramics are anticipated to serve as high-
temperature wave-transparent materials, yet the fabrication of high-performance porous β-Si …

A novel silicon-alumina-fused mullite-containing Ti 2 O 3 composite refractory is prepared
and sintered in the presence of solid carbon at 1300° C in N 2. The sintered samples exhibit …