Quasicrystalline materials constitute a new materials group with certain crystalline structural
characteristics, such as the generation of Bragg peaks in the X-ray data and points in the …

The solidification of peritectic alloys is reviewed, including both nucleation and growth. The
introduction defines various compositions associated with binary peritectic alloys, their …

In this work, the structure and mechanical properties of innovative Al-Cu-Fe based alloys
were studied. We focused on preparation and characterization of rapidly solidified and hot …

Sintering experiments on a granulated AlCuFeB quasi-crystalline powder were performed
using hot-pressing (HP) and spark plasma sintering (SPS). By coupling the analysis of a …

In this study, the Al 59 Cu 25.5 Fe 12.5 B 3 nanoquasicrystalline alloy and related crystalline
phases were synthesized through mechanical alloying using a high-energy ball milling and …

Dimethyl ether (DME) has been considered a potential and promising energy alternative for
petroleum subproducts due to its good burning characteristics, and to its high cetana content …

Three Al–Cu–Fe alloys with compositions of Al60–65Cu20–27.5 Fe12. 5–15 were prepared
by conventional casting and further processed by melt-spinning. The structures formed were …

Different alloy compositions of AlCuFe in the composition range of Al (75–65), Cu (25–15)
and Fe (15–7) at.% have been studied. Experimental results obtained in the Al70Cu20Fe10 …

The abrasive polishing behavior of Al 62 Cu 25.5 Fe 12.5 quasicrystal on Cu, Al and
austenite stainless steel alloys were investigated, to compare with commonly used hard …

Al–Cu–Fe alloy with a nominal composition of Al62Cu25. 5Fe12. 5 (at.%) has been
fabricated by a combination of pressure-assisted self-propagating high-temperature …