This review discusses various grades of titanium biomaterials and their sustainable
grindability for application in the medical field. Titanium biomaterials are most commonly …

A novel ternary Ti–15Zr–10Nb alloy with innovative microstructural and mechanical
properties and very good long-term corrosion resistance in simulated physiological solutions …

During the last decades, Titanium-based alloys have shown a suitable combination of
strength, ductility, corrosion and biocompatibility properties, that marks them as suitable …

In the present work, we report the preparation of a novel titanium-based alloy, namely
Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a …

Abstract Ti-35Nb-2Zr-0.5 O (wt%) alloy was prepared via a powder metallurgy process (cold
isostatic pressing of blended elemental powders and subsequent sintering) with the primary …

The new Ti‐15Ta‐5Zr alloy revealed a homogeneous bi‐phase α+ β microstructure without
inclusions or secondary phases. The alloy native passive film contains both Ti2O3, and TiO2 …

The present paper is focused on three different aging treatment of a TiNi alloy in order to
enhance corrosion resistance in oral cavity environment. The best corrosion resistance in …

A new quaternary alloy Ti-10Nb-10Zr-5Ta with near β fine, homogeneous microstructure,
low Young's modulus of 63.4 GPa and better mechanical properties than those of the …

A new Ti‐15Zr‐5Nb alloy with suitable microstructure and mechanical properties was
processed by galvanostatic anodization in 0.3 M H3PO4 solution and a continuous …

A new quaternary Ti–20Nb–10Zr–5Ta alloy was thermo‐mechanically processed; applying
a stress of 10 ton‐forces after heat treatment at 1000° C it resulted a very homogeneous, fine …