Investigation of structural, mechanical and magnetic characterization of electroplated W deposited NiMo thin films
In the current research work, NiMo thin films were successfully co-deposited with W on the
copper substrate (NiMoW) by varying the plating times like 30, 45, and 60 min at a constant …
copper substrate (NiMoW) by varying the plating times like 30, 45, and 60 min at a constant …
Development of a 125I source for its application in bone densitometry
This paper describes a method for the preparation of 125I sources for their use in bone
densitometer. The process consists of preparation of silver pellets of size∼ 2.5 mm (ϕ)× 0.6 …
densitometer. The process consists of preparation of silver pellets of size∼ 2.5 mm (ϕ)× 0.6 …
Development of a micro electrochemical cell for in-situ deposition of 63Ni for use in electron capture detector (ECD) in gas chromatography
In this work, we describe a novel electrochemical approach to deposit 63Ni coatings on the
inner surface of a copper annular ring for its application as an ionization source in electron …
inner surface of a copper annular ring for its application as an ionization source in electron …
Preparation of spherical 57Co source for the calibration of intra-operative gamma probe
J Udhayakumar, M Kumar, SS Gandhi… - Applied Radiation and …, 2012 - Elsevier
This paper describes an electrochemical method for deposition of a thin layer of 57Co on the
outer surface of a copper sphere of 5mm diameter intended to be used as a point radioactive …
outer surface of a copper sphere of 5mm diameter intended to be used as a point radioactive …
Selective Area Chemical-Deposition Process: An Innovative and Facile Route to Prepare 147Pm Sources for Dust Monitors
The potential utility of selective area chemical-deposition technique in the preparation of 147
Pm source for the measurement of particulate emission in air was demonstrated. The …
Pm source for the measurement of particulate emission in air was demonstrated. The …
Preparation of 57Co point sources for the performance evaluation of nuclear imaging instruments
This paper describes the utility of electrodeposition method to prepare 57 Co point sources.
A description of the electrolytic cell, the process of 57 Co electrodeposition, encapsulation …
A description of the electrolytic cell, the process of 57 Co electrodeposition, encapsulation …
A novel and facile approach for the preparation of 133Ba source core, encapsulation and quality evaluation
This paper describes a facile and effective method to prepare 133Ba source exploiting the
intrinsic properties of the anodized titanium to electro-deposit 133Ba from an aqueous …
intrinsic properties of the anodized titanium to electro-deposit 133Ba from an aqueous …
An electrochemical route to prepare planar 204Tl sources for the calibration of beta surface contamination monitors
This paper describes the utility of the electrochemical technique for the preparation of a
circular planar 204Tl source required for the calibration of beta surface contamination …
circular planar 204Tl source required for the calibration of beta surface contamination …
A chemical deposition method to prepare circular planar 147Pm sources for the measurement of particulate emission in air
J Udhayakumar, SS Gandhi, M Kumar… - Applied Radiation and …, 2013 - Elsevier
This paper describes a method for preparing a circular planar source of 17 mm diameter
containing approximately 400 kBq of 147 Pm employing a wet chemical deposition …
containing approximately 400 kBq of 147 Pm employing a wet chemical deposition …
An electrochemical pathway to prepare circular planar 90Sr/90Y sources for the calibration of surface contamination monitors
In this communication, we describe a novel method to prepare circular planar 90 Sr/90 Y
sources (ϕ= 16 mm) exploiting the intrinsic properties of the anodized titanium to electro …
sources (ϕ= 16 mm) exploiting the intrinsic properties of the anodized titanium to electro …