The application of intermetallic compounds for understanding in heterogeneous catalysis
developed in an excellent way during the last decade. This review provides an overview of …

The fourth version of the program package WinCSD is multi-purpose computer software for
crystallographic calculations using single-crystal and powder X-ray and neutron diffraction …

Replacing noble metals in heterogeneous catalysts by low-cost substitutes has driven
scientific and industrial research for more than 100 years. Cheap and ubiquitous iron is …

It has long been known that quasicrystal surfaces show low sliding friction and adhesion,
features that have led to practical applications, notably in cookware. Several mechanisms …

Fe-Al intermetallic alloys with aluminum content over 60 at% are in the area of the phase
equilibrium diagram that is considerably less investigated in comparison to the high …

Abstract θ-Al 13 Fe 4 is one of the common Fe-containing intermetallic compounds (FIMCs)
that forms during solidification in Al alloys. Silicon (Si) as impurity or solute in Al alloys is …

Abstract This study investigated 30Al–Si, Al–Cu, Al–Fe, Al–Mg, Al–10Si–Cu, Al–10Si–Fe,
and Al–10Si–Mg binary and ternary Al alloys, which are among the most commonly used …

AlF e 2 B 2 is a ferromagnet with the Curie temperature around 300 K and has the potential
to be an outstanding rare-earth free candidate for magnetocaloric applications. However …

The phase selection among different types of Fe-containing intermetallic compounds
(FIMCs) during solidification process cannot be controlled. Thus, resultant microstructures …

While the phenomenon of thermoelectricity is well understood from the physical point of
view, the chemical aspects of thermoelectric properties are still under consideration. This …