Aluminium castings have been widely used in many industries, including automotive,
aerospace, telecommunication, construction, consumer products, etc., due to their …

Over the past two decades, immense research efforts at a global level have extended CT-
Scan technology across several engineering fields. The state-of-the-art of the most relevant …

This experimental investigation describes the effect of tilt angle and rotational speed on the
characteristics of welding defects, intermetallic compounds, weld strength and micro …

In this study, we present experimental laser welding SUS304 stainless steel to T2 copper.
The forming mechanism of fusion zone polygonal porosity and heat affected zone (HAZ) …

In this project, we present experimental laser welding of pure copper to stainless steel in the
presence of beam oscillation. The microstructure, element distribution and mechanical …

Abstract Butt joints of Ti-6Al-4V plates were produced by electron beam welding process
using both oscillating and non-oscillating beams. The joints were then inspected using X-ray …

Formation of porosity and intermetallic compounds (IMCs) were studied in electron beam
welded (EBW) DP-600 steel to Al-5754 alloy joints at three different weld conditions such as …

Copper-stainless steel joints are achieved with sound double-sided appearances using Cu-
based, Cu-Ni-based and Fe-based filler metals. The weld zone in the Cu-based filled joint …

Multiscale microstructure evolution of tectonic coal determines CBM storage, development
and transport mechanism as well as its effect on coal and gas outburst potential. The multi …

Creep behavior is susceptible to uncertainty. Replicated creep data for steel can exhibit
logarithm decades of uncertainty, which necessitates the development of probabilistic creep …