H Ma, J Zeng, R Feng, X Pang, Q Wang… - Engineering Failure …, 2015 - Elsevier
Dynamic characteristics of cracked gear systems, also known as cracked-gear rotor systems, have received increasing interests among industry and academy in the past two decades …
K Yu, TR Lin, H Ma, X Li, X Li - Mechanical Systems and Signal Processing, 2021 - Elsevier
Limited condition monitoring data are recorded with label information in practice, which make the fault identification task more challenging. A semi-supervised learning (SSL) …
Z Chen, J Ning, K Wang, W Zhai - Nonlinear Dynamics, 2021 - Springer
Gear tooth profile deviations are usually inevitable due to the application of intentional tooth profile modification, the existence of undesired gear manufacturing errors and the tooth …
Z Chen, Z Zhou, W Zhai, K Wang - Mechanism and Machine Theory, 2020 - Elsevier
Time-varying mesh stiffness and gear transmission errors are the major excitations to gear dynamics system. How to calculate them more accurately and efficiently has attracted much …
Considering the realistic spalling morphology obtained from the fatigue experiment, a novel dynamic model for spalled gear pairs is established in this paper. Loaded tooth contact …
K Chen, Y Huangfu, H Ma, Z Xu, X Li, B Wen - Mechanical Systems and …, 2019 - Elsevier
Based on the finite element theory and the loaded tooth contact analysis, an analytical-finite- element model considering the complex foundation types and the crack propagation paths is …
H Ma, J Zeng, R Feng, X Pang, B Wen - Mechanism and Machine Theory, 2016 - Elsevier
Due to the effects of gear flexibility, the extended tooth contact (ETC) can appear, which is the phenomenon that the incoming tooth pair gets into contact ahead of the theoretical start …
Z Zhao, H Han, P Wang, H Ma, S Zhang… - Mechanism and Machine …, 2021 - Elsevier
Considering the influence of roughness on the normal contact stiffness of gears, a fractal contact model suited for gear pair contact has been established. On the basis of modified …
OD Mohammed, M Rantatalo - Engineering Failure Analysis, 2020 - Elsevier
The main purpose of condition monitoring in gear systems is to facilitate condition-based maintenance (CBM) by detecting the degradation of components, eg gear teeth, before the …