A modified biodegradable magnesium alloy (AZ31, 96 wt% Mg, 3 wt% Al, and 1 wt% Zn)
with polylactic acid (PLA) nanofibers was obtained by the electrospinning technique. The …

Abstract Various TiO 2 nanotubes on Ti50Zr alloy have been fabricated via a two step
anodization method in glycol with 15 vol.% H 2 O and 0.2 M NH 4 F under anodization …

The starting point of this study is a new alloy with rare metals such as Ta and Zr that has Ag
in the composition, proven antibacterial properties. New coatings on Ti-Zr-Ta-Ag capable of …

The primary focus of the paper is the fabrication of nanotubes via a two steps anodizing
procedure on a TiZr substrate followed subsequent annealing treatments and their effect on …

The corrosion resistance of the new Ti-6Al-4V-1Zr alloy in comparison with ternary Ti-6Al-4V
alloy in Ringer-Brown solution and artificial Carter-Brugirard saliva of different pH values …

This paper compares two types of polylactic acid (PLA) coating on AZ31 alloy obtained by
dip coating and electrospinning. Both types of coating were loaded with gentamicin sulphate …

The purpose of this study was to investigate the effect of ultrasonic scaling on teeth restored
with a light‐cured resin. Ultrasonic scaling is a very popular periodontal therapy among …

The mechanical properties of Ti6Al7Nb alloy deformed and heat treated at elevated
temperatures were correlated with its microstructure and corrosion behaviour in Ringer (of …

This paper describes the synthesis of a novel Ti-15Ta-5Zr alloy with an α+ ß stable,
homogeneous, biphasic microstructure (by optical microscopy, X-ray diffraction and …

The new Ti‐15Ta‐5Zr alloy revealed a homogeneous bi‐phase α+ β microstructure without
inclusions or secondary phases. The alloy native passive film contains both Ti2O3, and TiO2 …