Dynamic strain aging (DSA), observed macroscopically as serrated plastic flow, has long
been seen in nickel-base superalloys when plastically deformed at elevated temperatures …

Tensile behavior of modified 9Cr–1Mo steel was studied over the temperature range from
room temperature (RT) to 600° C at three strain rates 10− 5, 10− 4 and 10− 3 s− 1. Serrated …

The mechanical and corrosion behaviors of low carbon dual phase (DP) steel were studied
based on different tempering conditions. By increasing the time and temperature of …

The strain-controlled low-cycle fatigue behavior of P91 steel is investigated under various
strain amplitudes ranging from 0.20% to 1.0% at 25, 538, and 566° C. The fatigue life …

Tensile tests were performed on specimens in normalised and tempered condition at
temperatures ranging from 300 to 873K and at four strain rates in the range 6.33× 10− 5 to …

The tensile data involving austenitic Alloy C-276 suggest that this alloy is capable of
maintaining appreciable structural strength at temperatures relevant to the sulfuric acid …

Abstract China Low Activation Martensitic (CLAM) steel is considered to be the main
candidate material for the first wall components of future fusion reactors in China. In this …

In the study of the liquid metal embrittlement (LME) of the T91/lead-bismuth eutectic (LBE)
system, it is observed that LME occurs in a temperature interval which is similar to the …

Thermomechanical fatigue (TMF) behavior of a reduced activation ferritic-martensitic steel
was investigated under in-phase (IP) and out-of-phase (OP) conditions under different …

The results of tensile testing involving Waspaloy indicate that the failure strain was gradually
reduced at temperatures ranging between ambient and 300° C. Further, serrations were …