Abstract Alloy 718 is a Ni-Fe-based superalloy, which has been successfully adapted to
powder bed fusion (PBF) additive manufacturing because of the alloy's adaptability with …

Ultrasonic fatigue testing is a resourceful (time-and cost-saving) approach to assess the
dynamic failure of materials in the gigacycle range (ie, when the number of cycles to failure …

Widespread interest has been generated by the high-entropy alloys (HEAs) due to their
exceptional ability to combine high plasticity and high strength. However, there is still no …

Ultrasonic fatigue tests were performed to investigate high and very high cycle fatigue
behaviors of a laser additively manufactured Inconel 718 (IN718) alloy in the as-deposited …

The fracture surface of TC17 alloy tends to exhibit facet characteristic at R> 0, but it presents
rough area morphology at R=− 1 for the internal crack initiation and early growth region. The …

Tensile and fatigue behaviors of selective laser melted titanium alloy were investigated in
the as-built condition. The alloy has a high defect density, and its tensile properties are …

Tensile and fatigue behaviors of a compressor blade titanium alloy TC17 at room and high
temperatures (RT and HT) have been investigated up to very high cycle fatigue (VHCF) …

Abstract 42CrMo high-strength structural steel is widely used to manufacture the bolt
fasteners of engineering machinery, which are subjected to cyclic loading with a near-yield …

Three-point bending ultrasonic fatigue tests were performed on forged TC4 titanium alloy
with different laser shock peening treatments. The results show that HCF properties are …

Ultrasonic fatigue tests were performed on notched specimens to investigate high and very
high cycle fatigue behaviors in the laser shock peened region of a compressor blade …