Magnetic-dipole lines in Fe-like and Mn-like molybdenum ions
Optical spectra of Fe-like Mo 16+ and Mn-like Mo 17+ ions were measured using the newly
developed low-energy electron-beam ion trap at Fudan University. The observed emission …
developed low-energy electron-beam ion trap at Fudan University. The observed emission …
Comprehensive screening of plasma-facing Materials for nuclear fusion
Plasma-facing materials (PFMs) represent one of the most significant challenges for the
design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the …
design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the …
[HTML][HTML] Liquid lithium wettability studies on novel zirconium-alloyed porous tungsten
Liquid lithium wettability has been investigated on novel zirconium-alloyed porous tungsten
fabricated by the place-holder spark plasma sintering technique. This paper investigates the …
fabricated by the place-holder spark plasma sintering technique. This paper investigates the …
Surface morphological features of molybdenum irradiated by a single laser pulse
Molybdenum (Mo) is considered a plasma facing material alternative to tungsten (W) for
manufacturing the divertor armours of International Thermonuclear Experimental Reactor …
manufacturing the divertor armours of International Thermonuclear Experimental Reactor …
High transient-thermal-shock resistant nanochannel tungsten films
Developing high-performance tungsten plasma-facing materials for fusion reactors is an
urgent task. In this paper, novel nanochannel structural W films prepared by magnetron …
urgent task. In this paper, novel nanochannel structural W films prepared by magnetron …
The effectiveness of D2 pellet injection in reducing intra-ELM and inter-ELM tungsten divertor erosion rates in DIII-D during the Metal Rings Campaign
Edge localized modes (ELMs) in H-mode plasmas erode plasma-facing components (PFCs)
and lead to impurities in the core, reducing confinement. This study analyzes D 2 pellet …
and lead to impurities in the core, reducing confinement. This study analyzes D 2 pellet …
Measurement of plasma stream velocity in a pulsed plasma accelerator
The measurement of plasma stream velocity in a coaxial pulsed plasma accelerator using
two pairs of double plate probe (DPP) is reported in this article. The device produces a …
two pairs of double plate probe (DPP) is reported in this article. The device produces a …
OpenFOAM modeling of beryllium melt motion and splashing from first wall in ITER
C Zhang, G Miloshevsky - Physica Scripta, 2023 - iopscience.iop.org
Beryllium (Be) is a material which will be used as a plasma facing component in ITER due to
its unique properties of high thermal conductivity, low density, and high strength. However …
its unique properties of high thermal conductivity, low density, and high strength. However …
The investigation of the destructive effects of high-energy hydrogen ions on molybdenum and copper
A Chamani, SMM Abtahi, MA Tafreshi - Journal of Radioanalytical and …, 2021 - Springer
The effects of high-energy protons produced in the plasma focus device on molybdenum
and copper metals were studied. Molybdenum and copper samples were simultaneously …
and copper metals were studied. Molybdenum and copper samples were simultaneously …
Three-dimensional modeling of sputtered materials transport in diagnostic ducts of fusion devices
NA Babinov, AG Razdobarin, IM Bukreev… - Nuclear …, 2022 - iopscience.iop.org
Migration of plasma erosion products in plasma facilities is studied experimentally and
numerically within the framework of modeling transport of plasma-facing materials in the …
numerically within the framework of modeling transport of plasma-facing materials in the …