This paper focuses on the microstructural evolution of 304 L austenitic stainless steel (SS)
manufactured by laser powder bed fusion (LPBF) after stress-relieving annealing (650° C) …

This study reports the comprehensive effects of building direction and scanning speed on
the fatigue performance of 304L austenitic stainless steel (SS) fabricated by selective laser …

The present paper focuses on the detection of dominant damage mechanisms in tensile
loading of laminated composite specimens subjected to low-velocity impact (LVI) using …

Bonded joint utilization is limited under elevated temperatures because of the polymer's
relaxation. The hybrid bonded/bolted (HBB) joining allows more durable joints than both …

Composite bolted joints are being used extensively in primary load-bearing structures of
modern aircrafts. However, simulating progressive damage and failure of the bolted …

This study carried out the fatigue tests of selective laser melting (SLM) 304L austenitic
stainless steel (SS) made by different scanning speeds. The purpose is to deeply …

Hybrid joints have potential to improve the joint strength and efficiency compared to the
bonded or bolted joint. Several studies have been performed to understand the influence of …

During the interference-fit joining process of composite bolted structure, the bolt-hole contact
interface would form naturally. Understanding the microscale damage mechanism of bolt …

Selective laser melting (SLM), as a revolutionary technology for metal manufacturing,
attracts tremendous attention because it can produce complex components to benefit the …

Tensile tests on bonded, bolted and hybrid bolted/bonded carbon fibre reinforced polymer
(CFRP) joints were designed with four stacking sequences. The force-displacement curves …