Abstract In recent years (Al, Cr) 2 O 3 coatings manufactured by physical vapor deposition
(PVD) gained great interest as alternative to α-Al 2 O 3 coatings deposited by chemical …

Cathodic arc evaporated (Al 1-x Cr x) 2 O 3 coatings, prepared from powder-metallurgically
produced Al 0.75 Cr 0.25, Al 0.70 Cr 0.30, Al 0.50 Cr 0.50, and Al 0.25 Cr 0.75 cathodes …

In this study, Cr–Mo duplex-alloyed coating was prepared on carbon steel by double glow
plasma surface alloying (DGPSA). The effect of annealing and quenching and tempering …

Abstract (Al, Cr) 2 O 3 solid solutions in corundum-structure are of great potential for
protective applications facing severe mechanical and thermal conditions. In order to …

The structural evolution of cathodic arc evaporated Al-Cr-O coatings with hugely different Al,
Cr, and O contents was investigated by in-situ XRD measurements upon annealing in …

The challenge of synthesizing protective alumina coatings in corundum structure at
moderate temperatures inspired the development of novel strategies of both thin film …

Abstract Al 0.70 Cr 0.30-, Al 0.665 Cr 0.285 B 0.05-, and Al 0.665 Cr 0.285 Si 0.05-based
cathodic arc evaporated oxides were investigated with respect to their structural evolution …

The incorporation of macroparticles into arc evaporated thin films is generally unfavorable
as they, in most cases, induce growth defects. However, in recent studies, the authors found …

Abstract Fe-alloyed intermetallic Al–Cr coatings as well as substoichiometric oxides (with
respect to M 2 O 3 stoichiometry) thereof were synthesised by reactive arc evaporation in …

The structural evolution from the (inter) metallic to the oxide-stoichiometric regime within
oxygen-gradient Al 0.25 Cr 0.75-based coatings was investigated by transmission electron …