This article will provide an overview of state-of-the-art combinatorial/high-throughput
methodologies and tools for accelerated materials research and discovery. Combinatorial …

A large number of engineering alloys consist of two ductile phases; for example α/β titanium
alloys, α/β brasses and dual phase steels. Whenever a material consisting of two or more …

One of two self-contained volumes belonging to the newly revised Steel Heat Treatment
Handbook, Second Edition, this book examines the behavior and processes involved in …

Deformation response of ferrite and martensite in a commercially produced dual-phase
sheet steel with a nominal composition of 0.15% C–1.45% Mn–0.30% Si (wt.%) was …

This reference presents the classical perspectives that form the basis of heat treatment
processes while incorporating descriptions of the latest advances to impact this enduring …

A series of dual-phase (DP) steels containing finely dispersed martensite with different
volume fractions of martensite (V m) were produced by intermediate quenching of a boron …

The effect of martensite morphology and distribution in a ferrite matrix on the mechanical
properties and the damage accumulation in uniaxial tension was investigated in two …

Commercial dual-phase (DP) steel in sheet form and comprised of ferrite, martensite, and
bainite was subjected to uniaxial tension up to fracture. The damage characteristics were …

The effect of new ferrite present with different volume fractions and morphologies of
martensite on microvoids formation and tensile fracture behaviour in dual phase steels has …

The effects of martensite volume fraction (MVF) and strain state on necking behavior, post-
uniform elongation, and the nucleation and growth of voids in thin sheet dual phase steel …