Layered-perovskite oxides with in situ exsolved Co–Fe alloy nanoparticles as highly efficient electrodes for high-temperature carbon dioxide electrolysis
X Sun, Y Ye, M Zhou, H Chen, Y Li, P Chen… - Journal of Materials …, 2022 - pubs.rsc.org
Carbon dioxide (CO2) reduction using solid oxide electrolysis cells (SOECs) has attracted
great attention because of the high efficiency and fast kinetics enabled by high operating …
great attention because of the high efficiency and fast kinetics enabled by high operating …
Semiconductor Nb-Doped SrTiO3−δ Perovskite Electrolyte for a Ceramic Fuel Cell
A semiconductor-based electrolyte in a ceramic fuel cell (SCFC) has the potential to improve
the device performance even at lower temperatures (≤ 520° C) mainly due to its high ionic …
the device performance even at lower temperatures (≤ 520° C) mainly due to its high ionic …
Electrochemical properties of porous Sr0. 86Ti0. 65Fe0. 35O3 oxygen electrodes in solid oxide cells: Impedance study of symmetrical electrodes
This work evaluates porous Sr 0.86 Ti 0.65 Fe 0.35 O 3 (STF35) as a possible oxygen
electrode material for Solid Oxide Cells. The powder synthesis was performed by solid state …
electrode material for Solid Oxide Cells. The powder synthesis was performed by solid state …
Effects of yttrium substitution and oxygen deficiency on the crystal phase, microstructure, and thermoelectric properties of Sr1− 1.5 xYxTiO3− δ (0⩽ x⩽ 0.15)
The phase composition, microstructural and thermoelectric properties of n-type Sr 1− 1.5 x Y
x TiO 3− δ (0⩽ x⩽ 0.15) have been investigated over the temperature range of 50° C⩽ T⩽ …
x TiO 3− δ (0⩽ x⩽ 0.15) have been investigated over the temperature range of 50° C⩽ T⩽ …
The structure, electrical properties and chemical stability of porous Nb-doped SrTiO 3–experimental and theoretical studies
E Drożdż, A Koleżyński - Rsc Advances, 2017 - pubs.rsc.org
A series of porous SrTi1− xNbxO3 samples (with x= 0, 1, 2 and 3 mol%) were prepared by
wet synthesis and sintered at 1573 K. Single phase samples were obtained for each …
wet synthesis and sintered at 1573 K. Single phase samples were obtained for each …
[HTML][HTML] Structural and catalytic properties of ceria layers doped with transition metals for SOFCs fueled by biogas
The aim of this paper was to investigate an influence of the nanocrystalline Ce 0.8 A 0.2 O 2-
δ (A= Mn, Fe, Co, Ni, Cu) materials on the direct internal reforming of biogas in SOFC …
δ (A= Mn, Fe, Co, Ni, Cu) materials on the direct internal reforming of biogas in SOFC …
Structural Properties and Water Uptake of SrTi1−xFexO3−x/2−δ
T Miruszewski, K Dzierzgowski, P Winiarz… - Materials, 2020 - mdpi.com
In this work, Fe-doped strontium titanate SrTi1− xFexO3− x/2− δ, for x= 0–1 (STFx), has been
fabricated and studied. The structure and microstructure analysis showed that the Fe amount …
fabricated and studied. The structure and microstructure analysis showed that the Fe amount …
Structure and transport properties of triple-conducting Ba x Sr 1− x Ti 1− y Fe y O 3− δ oxides
T Miruszewski, K Dzierzgowski, P Winiarz, D Jaworski… - RSC …, 2021 - pubs.rsc.org
In this work, BaxSr1− xTi1− yFeyO3− δ perovskite-based mixed conducting ceramics (for x=
0, 0.2, 0.5 and y= 0.1, 0.8) were synthesized and studied. The structural analysis based on …
0, 0.2, 0.5 and y= 0.1, 0.8) were synthesized and studied. The structural analysis based on …
Study of La0. 1Sr0. 9TiO3 electrochemical response as anode for SOFC and its relation with microstructure
Abstract La 0.1 Sr 0.9 TiO 3 (LST) perovskite has been studied as anode material for
Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) applications. LST powders were …
Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) applications. LST powders were …
Characterization methods of nickel nano-particles obtained by the ex-solution process on the surface of Pr, Ni-doped SrTiO3 perovskite ceramics
In this paper, a novel electrode material based on Pr, Ni co-doped strontium titanate (Sr 0.7
Pr 0.3) x Ti 1− y Ni y O 3 with constant amount of 30% praseodymium dopant, different …
Pr 0.3) x Ti 1− y Ni y O 3 with constant amount of 30% praseodymium dopant, different …