TC17 and Ti2AlNb alloys were bonded by vacuum brazing using Ti–Zr–Cu–Ni filler metals.
Microstructure and mechanical properties of joints were comprehensively investigated by …

Abstract γ-TiAl-based alloys have been studied for decades due to their attractive properties.
However, the applications are limited because of their poor formability. Electron beam …

Brazing is a promising joining technique for nickel-based single-crystal superalloy (Ni-SXs)
intended for turbine blades, which endure the creep-fatigue conditions. In this work, the high …

Vacuum brazing of TC4 titanium alloy and 316 L stainless steel (SS) was conducted using Ti-
Zr-Cu-Ni-V amorphous filler metal. The effect of brazing temperature and brazing time on the …

Abstract Ultrasonic-assisted brazing (28.8 kHz, 180 W) was introduced to achieve high-
quality joints between Ti–6Al–4V alloy and ZrO 2 ceramic with Al-5wt.% Si brazing filler in …

The paper aims at understanding solidification phenomena and solid state precipitations
during dissimilar transient liquid phase bonding of γ-TiAl intermetallic compound to IN718 Ni …

Abstract A novel Ti–Ni–Nb–Zr quaternary filler alloy with the composition of Ti-(19∼ 25) Ni-
(15∼ 25)(Nb​+​ Zr)(wt.%) was designed. The filler alloy was composed of (Ti, Nb) ss,(Ti …

1. 郑州机械研究所有限公司新型钎焊材料与技术国家重点实验室, 河南郑州450001 2.
中机智能装备创新研究院(宁波) 有限公司, 浙江宁波315700 3. 哈尔滨焊接研究院有限公司 …

Al 2 O 3 ceramic was successfully joined to TiAl alloy by active brazing using an Ag-Cu-Ti+
W composite filler. The effects of brazing temperature, holding time, and W content on the …

Continuous carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites
(C f/LAS composites) are joined to Ti60 alloy vacuum brazed using Ti-Zr-Ni-Cu brazing …