Ceramics are widespread materials for engineering applications due to their properties,
such as significant wear resistance and low coefficient of thermal expansion. The high …

The spark plasma sintering technique was used to consolidate amorphous Si–C–N powder
to obtain polycrystalline Si3N4/SiC ceramic composites. With decreasing additive content …

In this work, a new method of SHS process has been investigated for the synthesis of
SiAlON under low nitrogen pressure. A gel mixture of silica and sodium oxide (sodium …

The aim of this study was to reveal the feasibility of adjusting aqueous nonoxide ceramic
inks for producing complex‐shaped functional ceramic parts by direct inkjet printing using …

A high creep resistance at specified temperature and compressive stress was obtained in
this investigation in the silicon nitride/silicon carbide composite with a nano–nano structure …

In this study, fully dense β-SiAlON/TiN composites were produced by Spark Plasma
Sintering (SPS) method. Si 3 N 4, Al 2 O 3, AlN and TiO 2 powders were used as precursors …

Silicon nitride based ceramics have been widely used as structural ceramics, due mainly to
their thermo-mechanical properties such as high density, high thermal shock resistance …

Single phase α-, β-and two phases α/β-sialon composites were sintered with both Nd2O3
and Yb2O3 by hot isostatic pressing (HIP). The mechanical and tribological properties of …

Microstructural evolution of silicon nitride (Si3N4) and SiAlON materials and its influence on
creep resistance is reviewed. Grain size, grain morphology, and the ratio of α‐to β‐phase …

In this research, β-SiAlON/TiN nanocomposites were synthesized from Si 3 N 4, Al 2 O 3,
AlN and TiO 2 powders by the combination of mechanical alloying and the subsequent …