Effect of sintering temperature on the structural, morphological, electrical, and magnetic properties of Ni–Cu–Zn and Ni–Cu–Zn–Sc ferrites
Abstract Polycrystalline Ni 0.3 Cu 0.2 Zn 0.5 Fe 2 O 4 and Ni 0.3 Cu 0.2 Zn 0.5 Sc 0.05 Fe
1.95 O 4 compounds have been prepared by standard solid-state reaction technique and …
1.95 O 4 compounds have been prepared by standard solid-state reaction technique and …
Magnetodielectric and magnetoelectric correlation in (1-x) PMN-PT/xCFO 0–3 particulate composites
In this work, the relationship between dielectric, ferroelectric, piezoelectric properties and the
magnetoelectric coupling in (1-x) PMN-PT/xCFO multiferroic particulate composites were …
magnetoelectric coupling in (1-x) PMN-PT/xCFO multiferroic particulate composites were …
In situ sol–gel co-synthesis under controlled pH and microwave sintering of PZT/CoFe2O4 magnetoelectric composite ceramics
This paper describes a novel sol–gel route for the in situ synthesis of heterostructure
materials, and discusses the effects of two different pH levels on the characteristics of the …
materials, and discusses the effects of two different pH levels on the characteristics of the …
Complex magnetoelectric effect in multiferroic composites: the case of PFN-PT/(Co, Ni) Fe2O4
We report a systematic study of the magnetoelectric (ME) voltage coefficient as a complex
quantity in the particulate composite of ferroelectric solid solution 0.94 Pb (Fe 1/2 Nb 1/2) O …
quantity in the particulate composite of ferroelectric solid solution 0.94 Pb (Fe 1/2 Nb 1/2) O …
In situ sol-gel co-synthesis at as low hydrolysis rate and microwave sintering of PZT/Fe2CoO4 magnetoelectric composite ceramics
Abstract Pb (Zr 0.53 Ti 0.47) O 3/Fe 2 CoO 4 (PZT/Fe 2 CoO 4) diphase particulate
composites were prepared in an 80: 20 M ratio by the in situ sol-gel co-synthesis method …
composites were prepared in an 80: 20 M ratio by the in situ sol-gel co-synthesis method …
Composition control of magnetoelectric relaxor behavior in multiferroic BaZr0. 4Ti0. 6O3/CoFe2O4 composites
Abstract The (BaZr 0.4 Ti 0.6 O 3) 1− x/(CoFe 2 O 4) x (abbreviated as BZT 1− x/CFO x; x=
0.10, 0.15, 0.20 and 0.25) polycrystalline composites are synthesized by a high-temperature …
0.10, 0.15, 0.20 and 0.25) polycrystalline composites are synthesized by a high-temperature …
Grain coarsening and its effects on the properties of magnetoelectric 0.675 (Pb (Mg1/3Nb2/3) O3)–0.325 PbTiO2/CoFe2O4 particulate composites
In this work, the influence of the grain coarsening on dielectric, magnetic and
magnetoelectric properties of particulate composites constituted by (0.8) 0.675 (Pb (Mg 1/3 …
magnetoelectric properties of particulate composites constituted by (0.8) 0.675 (Pb (Mg 1/3 …
Effect of different ferroelectric phases on magnetoelectric properties of Co-ferrite particulate composites
In this work, the influence of the ferroelectric phase on the magnetoelectric response of
particulate magnetoelectric composites were investigated. The composites constituted by …
particulate magnetoelectric composites were investigated. The composites constituted by …
Structural and dielectric properties of multiferroic (1-x)(0.675PMN-0.325PT)/(x)CoFe2O4 particulate composites obtained by microwave sintering
This paper discusses the effect of microwave-assisted sintering on the microstructural and
physical characteristics of (1-x) Pb (Mg1/3Nb2/3) 0.675 Ti0. 325O3/(x) CoFe2O4 ceramic …
physical characteristics of (1-x) Pb (Mg1/3Nb2/3) 0.675 Ti0. 325O3/(x) CoFe2O4 ceramic …
Maintenance of integrity between phases in PMN-PT/NFO hot-forged particulate magnetoelectric composites
The influence of hot forging temperature on microstructure and magnetoelectric properties in
(0.8) Pb (Mg1/3Nb2/3) 0.68 Ti0. 32O3+ (0.2) NiFe2O4 particulate composites were …
(0.8) Pb (Mg1/3Nb2/3) 0.68 Ti0. 32O3+ (0.2) NiFe2O4 particulate composites were …