In this work, we demonstrate that the corrosion resistance of the FeCrNiCoNb 0.5 eutectic
high entropy alloy (EHEA) can be tuned by controlling the size of its eutectic structure …

Passivity breakdown on HDSS 2707 has been studied and the electrochemical data are
interpreted in terms of the Point Defect Model. Pitting parameters of HDSS 2707 are …

The surface chemistry and thickness of the native oxide, hydroxide, and modified sub-
surface layer of three Ni superalloys (alloy 59, 625, and 718) were determined by …

This study focuses on the corrosion inhibition of molybdate on low-carbon (LC) steel and
10% Cr steel with high chloride contamination after the natural formation of passive films in …

The passive film stability on stainless steel can be affected by hydrogen absorption and lead
to microstructure embrittlement. This work shows that the absorption of hydrogen results in …

Various mechanisms have been proposed for hydrogen embrittlement of duplex stainless
steel, but the causation of hydrogen-induced material degradation has remained unclear …

Stability of passive film of 2205 DSS in H 2 S-containing geothermal environments was
investigated by immersion test, HTHP electrochemical measurement, surface analysis …

To investigate aging effect on the passive film of Ni23Cr15Mo and Ni22Cr9Mo3Nb,
synchrotron-based X-ray photoelectron spectroscopy (XPS) was used to analyze the …

The structure and chemical composition of the passive film formed on 17-4PH martensitic
stainless steel (MSS) manufactured by powder bed laser beam melting (LBM) were …

Abstract (CuZnMnNi) 100− x Sn x (x= 0, 4, at%) high-entropy brass alloys (HEBAs) were
prepared via mechanical alloying and hot-press sintering technology, the corrosion behavior …