Carbon foam electromagnetic mm-wave absorption in reverberation chamber
The electromagnetic (EM) absorbing cross section (ACS) of carbon foams in the mm-wave
frequency range 50–70 GHz is analyzed by means of a reverberation chamber (RC) set-up …
frequency range 50–70 GHz is analyzed by means of a reverberation chamber (RC) set-up …
Carbon nanotube thin film patch antennas for wireless communications
Early work on carbon nanotube (CNT) antennas indicated that their performance could not
match that of metals such as copper. However, recent improvements in fluid phase CNT …
match that of metals such as copper. However, recent improvements in fluid phase CNT …
Fast and Accurate Assessment of the “Well Stirred Condition” of a Reverberation Chamber From Measurements
G Andrieu, N Ticaud, F Lescoat… - IEEE Transactions on …, 2018 - ieeexplore.ieee.org
This paper presents a method to determine the frequency where a reverberation chamber
starts to be “well stirred” according to the number of stirring conditions (ie, different positions …
starts to be “well stirred” according to the number of stirring conditions (ie, different positions …
Reverberation chamber metrology for wireless internet of things devices: Flexibility in form factor, rigor in test
A Hubrechsen, KA Remley… - IEEE Microwave …, 2022 - ieeexplore.ieee.org
Internet of things (IoT) devices are proliferating in our connected world, with the number of
devices expected to exceed 14 billion in 2023. Wireless IoT applications are increasing day …
devices expected to exceed 14 billion in 2023. Wireless IoT applications are increasing day …
High efficiency carbon nanotube thread antennas
Although previous research has explored the underlying theory of high-frequency behavior
of carbon nanotubes (CNTs) and CNT bundles for antennas, there is a gap in the literature …
of carbon nanotubes (CNTs) and CNT bundles for antennas, there is a gap in the literature …
Improved antenna efficiency measurement uncertainty in a reverberation chamber at millimeter-wave frequencies
D Senic, DF Williams, KA Remley… - … on Antennas and …, 2017 - ieeexplore.ieee.org
We provide results of antenna radiation and total radiation efficiency at millimeter-wave
frequencies gathered with a new open-ended waveguide-plate method that is compared to …
frequencies gathered with a new open-ended waveguide-plate method that is compared to …
Effects of signal bandwidth on total isotropic sensitivity measurements in reverberation chamber
W Xue, F Li, X Chen - IEEE Transactions on Instrumentation …, 2021 - ieeexplore.ieee.org
Nowadays, wireless devices exhibit an explosive growth trend, which imposes great
challenges on over-the-air (OTA) testing. Obviously, the reliability and efficiency of OTA …
challenges on over-the-air (OTA) testing. Obviously, the reliability and efficiency of OTA …
Over-the-air noise figure characterization of mm-wave active integrated antennas using a reverberation chamber
T Stek, A Hubrechsen, DS Prinsloo… - IEEE Transactions on …, 2022 - ieeexplore.ieee.org
Active integrated antennas (AIAs) are used in low-noise receivers for their good noise
performance compared with their nonintegrated counterparts. However, it is challenging to …
performance compared with their nonintegrated counterparts. However, it is challenging to …
估计混响室旋转搅拌器相关角度的快速方法.
徐千， 史云雷， 陈辉 - Safety & EMC (1005-9776), 2024 - search.ebscohost.com
为保证混响室中样本的统计独立性, 混响室内搅拌器的相关角度给出了测试过程中搅拌器步进
角度的下界. 依照IEC 61000-4-21: 2011 确定搅拌器相关角度时, 由于每次转动角度较小 …
角度的下界. 依照IEC 61000-4-21: 2011 确定搅拌器相关角度时, 由于每次转动角度较小 …
Effects of user proximity on total radiated power and total isotropic sensitivity measurements in reverberation chambers
The reverberation chamber (RC) has been proven to be a powerful technique to evaluate
the over-the-air (OTA) performances of massive and diverse wireless devices. For wireless …
the over-the-air (OTA) performances of massive and diverse wireless devices. For wireless …