Review of warm forming of aluminum–magnesium alloys
Aluminum–magnesium (Al–Mg) alloys (5000 series) are desirable for the automotive
industry due to their excellent high-strength to weight ratio, corrosion resistance, and …
industry due to their excellent high-strength to weight ratio, corrosion resistance, and …
Warm forming behavior of high strength aluminum alloy AA7075
W Hui, Y Luo, P Friedman, M Chen, GAO Lin - Transactions of Nonferrous …, 2012 - Elsevier
The formability of aluminum alloy AA7075 at elevated temperature was investigated through
experiment. Stress–strain relationship at different temperatures and forming speeds were …
experiment. Stress–strain relationship at different temperatures and forming speeds were …
Warm sheet metal forming of energy-absorbing elements made 7075 aluminum alloy in the hardened state T6
K Jaśkiewicz, M Skwarski, P Kaczyński… - … International Journal of …, 2022 - Springer
The article covers experimental research on the forming of products made of 7075 aluminum
alloy. This aluminum alloy grade is characterized by high strength, but due to its low …
alloy. This aluminum alloy grade is characterized by high strength, but due to its low …
Flow curve prediction of Al–Mg alloys under warm forming conditions at various strain rates by ANN
This paper describes an approach based on artificial neural network (ANN) to identify the
material flow curves of strain hardened 5083-H111 and 5754-O Al–Mg alloys at the …
material flow curves of strain hardened 5083-H111 and 5754-O Al–Mg alloys at the …
A study on the extent of ironing of EDD steel at elevated temperature
An experimental investigation has been carried out to determine the effect of extent of
deformation (ironing) over the cup wall at elevated temperatures. Clearance between punch …
deformation (ironing) over the cup wall at elevated temperatures. Clearance between punch …
Modeling uniaxial, temperature and strain rate dependent behavior of Al–Mg alloys
The mechanical properties of 5083-H111 and 5754-O Al–Mg alloys at various testing
temperatures (between room temperature (RT) and 300° C) and strain rates (0.0016–0.16 …
temperatures (between room temperature (RT) and 300° C) and strain rates (0.0016–0.16 …
Evaluation of tensile behaviour of 5754 aluminium–magnesium alloy at cold and warm temperatures
Cost effective lightweight vehicles have recently become a key target for automotive
manufactures due to increasing concerns about minimising environmental impact and …
manufactures due to increasing concerns about minimising environmental impact and …
Development of forming temperature curves for warm deep drawing process under non-isothermal conditions
Temperature is the main effective process parameter in the warm deep drawing (WDD)
process to improve the formability of light-weight engineering materials, and this feature …
process to improve the formability of light-weight engineering materials, and this feature …
Numerical analysis of dimension precision of U-shaped aluminium profile rotary stretch bending
Z YU, Z LIN - Transactions of Nonferrous Metals Society of China, 2007 - Elsevier
In order to enhance the dimension precision of bent part, advanced bending technologies is
requested recently. Rotary stretch bending (RSB) is a suitable technology to realize high …
requested recently. Rotary stretch bending (RSB) is a suitable technology to realize high …
Comparative assessment of warm formability in Al–Mg alloys through limiting dome height experiments and finite element simulation studies
The increase in magnesium (Mg) content adversely affects the formability of Al–Mg alloys.
Formability assessments for AA5052 and AA5083 alloys, featuring Mg content at 2.6 wt …
Formability assessments for AA5052 and AA5083 alloys, featuring Mg content at 2.6 wt …