Effect of different device parameters on tin-based perovskite solar cell coupled with In2S3 electron transport layer and CuSCN and Spiro-OMeTAD alternative hole …
I Alam, MA Ashraf - Energy Sources, Part A: Recovery, Utilization …, 2020 - Taylor & Francis
ABSTRACT SCAPS 1-D was used for the simulation of lead-free environmentally benign
methylammonium tin-iodide (CH3NH3SnI3) based solar cell. Indium sulfide (In2S3) was …
methylammonium tin-iodide (CH3NH3SnI3) based solar cell. Indium sulfide (In2S3) was …
Numerical simulation of Cu2ZnSnS4 based solar cells with In2S3 buffer layers by SCAPS-1D
P Lin, L Lin, J Yu, S Cheng, P Lu… - Journal of Applied …, 2014 - jase.tku.edu.tw
The performance of the Cu2ZnSnS4 based solar cell is investigated using a simulation
program called Solar Cell Capacitance Simulator (SCAPS). The cell structure is based on …
program called Solar Cell Capacitance Simulator (SCAPS). The cell structure is based on …
[HTML][HTML] Physical and electrical properties of molybdenum thin films grown by DC magnetron sputtering for photovoltaic application
DC magnetron sputtering was utilized to grow thin layers of molybdenum (Mo) on top of
soda lime glass substrates. Deposition power was varied for suitable characteristics of films …
soda lime glass substrates. Deposition power was varied for suitable characteristics of films …
An investigation into the effects of band gap and doping concentration on Cu(In,Ga)Se2 solar cell efficiency
A simulation study of a Cu (In 1− x Ga x) Se 2 (CIGS) thin film solar cell has been carried out
with maximum efficiency of 24.27%(V oc= 0.856 V, J sc= 33.09 mA/cm 2 and FF= 85.73%) …
with maximum efficiency of 24.27%(V oc= 0.856 V, J sc= 33.09 mA/cm 2 and FF= 85.73%) …
Enhancing the open-circuit voltage and efficiency of CZTS thin-film solar cells via band-offset engineering
S Enayati Maklavani, S Mohammadnejad - Optical and Quantum …, 2020 - Springer
Limits on the conversion efficiency and open-circuit voltage lead to low kesterite thin-film
solar cell performance. The conduction band offset (CBO) between the absorber and buffer …
solar cell performance. The conduction band offset (CBO) between the absorber and buffer …
Reduction of interface recombination current for higher performance of p+-CZTSxSe (1-x)/p-CZTS/n-CdS thin-film solar cells using Kesterite intermediate layers
SE Maklavani, S Mohammadnejad - Solar Energy, 2020 - Elsevier
There have been significant efforts to enhance the performance of CZTS thin-film solar cells.
However, the increase in series resistance, formation of the unfavorable MoS 2 between the …
However, the increase in series resistance, formation of the unfavorable MoS 2 between the …
The impact of the carrier concentration and recombination current on the p+pn CZTS thin film solar cells
S Enayati Maklavani, S Mohammadnejad - Optical and Quantum …, 2020 - Springer
One of the main causes of low performance of Cu 2 ZnSnS 4 (CZTS) based thin film solar
cells is its high recombination current. In this paper, the effects of the carrier concentration …
cells is its high recombination current. In this paper, the effects of the carrier concentration …
A comprehensive study on the effects of alternative sulphur precursor on the material properties of chemical bath deposited CdS thin films
Chemical bath deposition (CBD) method was used to deposit CdS thin films on soda-lime
glass substrates by using n-methylthiourea (NTU) as an alternative sulphur source and were …
glass substrates by using n-methylthiourea (NTU) as an alternative sulphur source and were …
Performance enhancement of CIGS solar cells using ITO as buffer layer
F Ghamsari-Yazdel, A Fattah - Micro and Nanostructures, 2022 - Elsevier
The purpose of this research is the reduction of parasitic absorption to improve the CIGS
solar cell performance. Decreasing the traditional CdS buffer layer thickness is a reduction …
solar cell performance. Decreasing the traditional CdS buffer layer thickness is a reduction …
A modeling study on utilizing In2S3 as a buffer layer in CIGS-based solar cells
N Beyrami, M Saadat, Z Sohbatzadeh - Journal of Computational …, 2022 - Springer
Abstract In Cu (In1− x, Ga x) Se (CIGS)-based solar cells, the cadmium sulfide (CdS) layer is
conventionally used as a buffer layer. In the current study, the CdS layer was replaced by the …
conventionally used as a buffer layer. In the current study, the CdS layer was replaced by the …