Trochoidal milling has been developed to extend the cutting tool life as compared to
conventional milling. It is widely used in the machining of slots and corners of molds and …

The article presents the results of machining materials in hardened state. In the paper,
different trochoidal tool paths are compared with each other and with the conventional …

It is well known that the duplex stainless steels are considered to be difficult-to-machine
because of its high toughness, low thermal conductivity, and high degree of work hardening …

In this study a tool with interchangeable inserts of sintered carbides coated with AlTiN were
used to mill a duplex stainless steel with trochoidal strategies. Cutting speed range from 120 …

U-pass milling is a roughing method that combines the characteristics of flank milling with
conventional trochoidal milling. The tool cuts in and out steadily, and the tool–workpiece …

摆线剥铣工艺具有加工效率高, 切削力小, 刀具耐用度高的优点, 然而由于缺乏五轴剥铣加工的
轨迹规划方法, 导致高效剥铣技术难以应用于整体叶轮加工. 针对该问题提出一种整体叶轮圆角 …

The article presents a comparison of three trochoidal paths: written by G-Code, generated
using the overlays from the machine level, and generated using the CAD/CAM environment …

The paper provides an analysis of the impact of the values of cutting tool inclination
strategies and angles measured in the parallel and perpendicular to feed direction, radial …

本研究之目的為利用擺線銑削所具有減低切削力的特性, 探討大深度銑削SKD11 工具鋼的影響.
首先以Ø3. 0mm 的端銑刀與7.5 mm 的切削深度做為固定條件, 使用田口法L9 (34) …

This paper aims to study, analytically and experimentally, the effects of trochoidal milling
parameters on the waviness and the surface roughness of P20 alloy steel slots. The …