When metals are modified by second-phase particles or fibers, metal matrix composites
(MMCs) are formed. In general, for a given metallic matrix, reinforcements differing in their …

Aluminum‐based glassy alloys and composites exhibit more than two times higher tensile
and compressive strength and superior corrosion resistance compared to the conventional …

Current study reports fabrication of in-situ Fe-based bulk metallic glass (BMG)
nanocomposites by carrying out spark plasma sintering of Fe 57 Cr 9 Mo 5 B 16 P 7 C 6 …

Al alloys with nominal composition of Al 86 Cu 6 Y 6 Co 2, Al 86 Cu 6 Y 6 La 2 and Al 84 Cu
6 Co 2 Y 6 La 2 (at.%) were studied in as-spun and annealed states using differential …

The effect of cooling rate on the microstructure and mechanical properties of the
Al86Cu6Co2Y6 (at.%) alloy is studied in copper mold casting and melt spinning processes …

In the present study, Al 86 Ni 8 Y 6 and Al 86 Ni 6 Y 4.5 Co 2 La 1.5 bulk amorphous
nanocomposites were synthesized by spark plasma sintering of milled melt spun ribbon …

In this study, nanocrystallization behavior, thermal stability, mechanical properties, and
intermetallics formation of Al86Cu6Y6Co2 (at.%) as-spun amorphous ribbons were …

Abstract Amorphous melt-spun Al 86 Cu 6 Y 6 La 2 (at.%) alloy is hot consolidated at T= 723
K and P= 700 MPa. The glassy ribbons show three devitrification steps which fcc-Al phase is …

To develop metallic glass composites for practical applications, modulating the
crystallization behavior of metallic glasses is an effective and important avenue, as …

6. Qualified in GATE 2019 (conducted by IIT, Madras) with score 415 validity 17 March 2019
to 16 March 2022. 7. Qualified in GATE 2015 (conducted by IIT, Kanpur) with score 413 …