Correlation of materials property and performance with internal structures evolvement revealed by laboratory X-ray tomography
L Zhang, S Wang - Materials, 2018 - mdpi.com
Although X-rays generated from a laboratory-based tube cannot be compared with
synchrotron radiation in brilliance and monochromaticity, they are still viable and accessible …
synchrotron radiation in brilliance and monochromaticity, they are still viable and accessible …
Studies on high-temperature stability and strengthening mechanisms of high/medium-entropy alloys for potential nuclear applications: The case of FeCrV-based alloys
Z Cheng, J Cui, D Chen, X Gao, J Ren, T Wang… - Materials Science and …, 2023 - Elsevier
High-temperature stability and strengthening mechanisms of high/medium-entropy alloys
(HEAs/MEAs) have been studied for Ti-added FeCrV-based MEAs. Experimental results …
(HEAs/MEAs) have been studied for Ti-added FeCrV-based MEAs. Experimental results …
Influence of mechanical alloying and extrusion conditions on the microstructure and tensile properties of Low-Cr ODS FeCrAl alloys
Abstract Low-chromium (< 10% Cr) high strength oxide dispersion strengthened (ODS)
FeCrAl alloys are considered promising candidates for accident tolerant fuel cladding in light …
FeCrAl alloys are considered promising candidates for accident tolerant fuel cladding in light …
Influence of surface temperature in the laser assisted cold spray deposition of sequential oxide dispersion strengthened layers: Microstructure and hardness
Six-sequential layer deposits of an oxide dispersion strengthened (ODS) Fe 91 Ni 8 Zr 1
alloy were laser assisted cold sprayed (LACS) at 650° C and 950° C. The nanoscale …
alloy were laser assisted cold sprayed (LACS) at 650° C and 950° C. The nanoscale …
Nanostructured Oxide‐Dispersion‐Strengthened CoCrFeMnNi High‐Entropy Alloys with High Thermal Stability
A nanostructured oxide‐dispersion‐strengthened (ODS) CoCrFeMnNi high‐entropy alloy
(HEA) is synthesized by a powder metallurgy process. The thermal stability, including the …
(HEA) is synthesized by a powder metallurgy process. The thermal stability, including the …
[HTML][HTML] Micro mechanical testing of candidate structural alloys for Gen-IV nuclear reactors
Ion irradiation is often used to simulate the effects of neutron irradiation due to reduced
activation of materials and vastly increased dose rates. However, the low penetration depth …
activation of materials and vastly increased dose rates. However, the low penetration depth …
Control of microstructure and hardness of ODS-CrFeNi MEAs by Y2O3/Zr addition
S Peng, Z Lu, L Yu - Materials Characterization, 2022 - Elsevier
Oxide dispersion strengthened (ODS)-CrFeNi medium entropy alloys (MEAs) with different
addition amounts of Y 2 O 3/Zr were prepared by mechanical alloying (MA) and spark …
addition amounts of Y 2 O 3/Zr were prepared by mechanical alloying (MA) and spark …
[HTML][HTML] In-Situ synchrotron investigation of elastic and tensile properties of oxide dispersion strengthened EUROFER97 steel for advanced fusion reactors
The augmentation of mechanical properties of reduced activation ferritic martensitic steels
through the introduction of creep resistant nano-oxide particles produces a class of oxide …
through the introduction of creep resistant nano-oxide particles produces a class of oxide …
In-situ high-energy X-ray characterization of neutron irradiated HT-UPS stainless steel under tensile deformation
The tensile deformation behavior of a high-temperature, ultrafine-precipitate strengthened
(HT-UPS) stainless steel was characterized in-situ with high-energy X-ray diffraction at 20 …
(HT-UPS) stainless steel was characterized in-situ with high-energy X-ray diffraction at 20 …
Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy
J Wang, B Fu, L Bergmann, F Liu… - Journal of Materials …, 2023 - Springer
Friction stir welding (FSW) was investigated for producing joints of alloy PM2000 with
welding speeds from 1 to 3 mm/s. The effect of welding speed on the microstructures and …
welding speeds from 1 to 3 mm/s. The effect of welding speed on the microstructures and …