The coal-fired power plant produces a by-product called as fly ash. Large quantity of fly ash
is generated throughout the world and storage as well as disposal of this menace is a …

Abstract Thermal sprayed Cr 3 C 2-NiCr coatings are widely used to protect industrial
components from ambient or elevated erosive degradation. Various thermal spraying …

This paper deals with the influence of laser surface texturing on tribological performance of
two different tool steels:(a) Böhler K100 produced by conventional production technology …

Thermally sprayed cermet coatings are widely used to improve the wear resistance of
component surfaces. In this study, Cr 3 C 2-NiCr cermet coatings were deposited by shroud …

Present investigation characterizes solid particle erosion response of neat epoxy and crump
rubber filled epoxy composites. Three types of composites were prepared by reinforcing …

Abstract Despite advances in NiCr+ Cr 3 C 2–NiCr coating improving the erosion wear
resistance at low impact angles, the deterioration at medium and high impact angles has not …

In this research work, high-velocity oxy-fuel thermal spraying is used to develop TiAlN
coatings on AA1050 and AA5083 aluminium alloy substrates. Slurry wear behavior of …

In the present investigation NiCrBSi/flyash/Cr 2 O 3 and NiCrBSi/flyash/Mo composite
coatings are developed using atmospheric plasma spray technique on superni 76 alloy …

To improve the erosion resistance of typical Cr 3 C 2-NiCr coatings at high temperature, a
novel Cr 3 C 2-NiCrCoMo/nano-TiC (NCT) coating was developed and deposited by the …

In this work, a NiCr-Cr 3 C 2 coating was prepared on an AISI 1045 steel substrate by
plasma spraying and then remelted with the tungsten inert gas (TIG) arc method. The …