Microstructure and heat-treatment response of Al-2024/TiC composites
Composites of a commercial Al-2024 alloy reinforced with particulate TiC have been
produced by the pressureless melt infiltration route. Infiltration was carried out at 1200° C for …
produced by the pressureless melt infiltration route. Infiltration was carried out at 1200° C for …
Synthesis and characterization of zircon sand/Al-4.5 wt% Cu composite produced by stir casting route
Zircon sand particles of different size and amount have been incorporated in Al-4.5 wt% Cu
alloy by stir casting route. Coarser particles of size between 90 and 135 μm can be …
alloy by stir casting route. Coarser particles of size between 90 and 135 μm can be …
Study of age hardening behavior of Al–4.5 wt% Cu/zircon sand composite in different quenching media–A comparative study
The age hardening behavior of Al–4.5% Cu alloy composite reinforced with zircon sand
particulates and produced by stir casting route has been investigated in different quenching …
particulates and produced by stir casting route has been investigated in different quenching …
Effect of ageing time on mechanical properties and tribological behaviour of aluminium hybrid composite
N Radhika, R Subramanian - International journal of materials …, 2014 - degruyter.com
Aluminium/alumina/graphite hybrid metal matrix composites prepared by using the stir
casting technique were heat treated to enhance mechanical properties such as strength …
casting technique were heat treated to enhance mechanical properties such as strength …
Aging behavior of sub-micron Al2O3P/2024Al composites
J Longtao, Z Min, W Gaohui, Z Qiang - Materials Science and Engineering …, 2005 - Elsevier
Age-hardening behaviors of nearly spherical 0.3 μm-Al2O3 particles reinforced 2024Al
composites under the temperature of 160, 175 and 190° C were studied by means of Brinell …
composites under the temperature of 160, 175 and 190° C were studied by means of Brinell …
[图书][B] Metal matrix composites
L Geng, K Wu - 2018 - Springer
Metal matrix composites (MMCs) are a class of artificial materials compounded by the
introduction of certain content reinforcements, such as fibers, whiskers, or particles, into the …
introduction of certain content reinforcements, such as fibers, whiskers, or particles, into the …
Ageing behavior of Al–4.5 wt% Cu matrix alloy reinforced with Al2O3 and ZrSiO4 particulate varying particle size
Age hardening behavior of Aluminum metal matrix composite has been of great interest of
present research. The nature of change in kinetics and magnitude of hardening during …
present research. The nature of change in kinetics and magnitude of hardening during …
Aging behavior and precipitation kinetics of SiCp/6061AI composites
Z Min, W Gaohui, J Longtao - Journal of materials science, 2004 - Springer
The aging behavior of SiC particle reinforced 6061 aluminum matrix composites was
investigated with Brinell hardness measurement, differential scanning calorimetry (DSC) …
investigated with Brinell hardness measurement, differential scanning calorimetry (DSC) …
Analyzing the mechanical and wear behavior of age hardening processed AZ31 magnesium composites
P Seenuvasaperumal, A Elayaperumal… - Surface Topography …, 2021 - iopscience.iop.org
The usage of AZ31 magnesium alloy has been limited in tribology applications, due to low
hardness and poor wear resistance. In this connection, the age-hardening process is a …
hardness and poor wear resistance. In this connection, the age-hardening process is a …