Tool wear is one of the main parameters employed for evaluating tool life, due to its
influence in the loss of quality of the manufactured parts. So, minimising tool wear is …

Adhesion wear is the main wear mechanism in the dry turning of aluminium alloys. This type
of wear produces an adhesion of the machining material on the cutting tool, decreasing the …

Scanning electron microscopy (SEM) has been used to identify and analyse the secondary
adhesion effect precursors formed during the dry drilling processes of Ti‐6Al‐4V alloy over …

Bu çalışmada, bakır ve silisyum katkılarının Al-25Zn alaşımının mekanik ve işlenebilirlik
özellikleri üzerindeki etkisi deneysel olarak incelenmiştir. İkili Al-25Zn, üçlü Al-25Zn-3Cu ve …

Tool wear concept has been usually related with the loss of tool material. Currently, it must
not involve only this way, since wear includes all the changes of the tool properties …

For the study of the tool-chip sticking–welding principle and welding layer formation
conditions of the carbide cutter's rake face, the actual conditions of sticking–welding …

Minimizing downtime in machine tools is one of the factors that determine the performance
increase of the production processes involved. This increase can be considered from …

Machining operations are chosen by aircraft manufacturers worldwide to process light
aluminum alloys. This type of materials presents good characteristics in terms of weight and …

Purpose: In this study, it was aimed to investigate the effect of Cu and Si on the machinability
properties of Al-25Zn alloy. Theory and Methods: Firstly, microstructural and mechanical …

Fatigue behavior takes a special relevance in manufacturing aeronautical parts due to safety
reasons. Considering friendly environmental techniques, dry machining results in higher …